My eTRust Anti-V never did scan any eMails.
CA (AKA e-Trust) Anti-Virus 2007 scans email and I'm pretty sure all
previous versions do as well:
http://home2.ca.com/DRHM/servlet/Con...tID=5 0698000
I have not used ANY Symantec production more than a year
What Norton application was it (e.g., NAV 2004, NIS 2005)? Did you uninstall
it via Add/Remove Programs AND then run the appropriate Symantec removal
tool to clean up the "remainders" that are ALWAYS left behind? Either may
be the source of your problem.
You don't need to export/import anything. After disabling Email Scanning
(check with CA/e-Trust Support or your AV app's Help), simply open the new
identity File Import Messages Select OE6 option Point the wizard
to the other identity's store
(
http://www.insideoe.com/files/store.htm#storemain) ...
The new identity's Address Book will contain everything in the old
identity's, as long as the new identity was created in the same (WinXP) User
Profile. See
http://www.insideoe.com/files/wab.htm (including Command Line
Switches).
Then I tried to import my messages and got an error that said that "an
error occured..."
It's a moot point now but not knowing how or to where/what you exported the
messages or how you tried to import them, I can't help you with this. (See
below.)
Also my address book is now empty...
Your original Address Book? Is MS Office and/or Outlook also installed? Do
you think you had more than 999 contacts in Address Book? Did you select
(Address Book) View All files and folders, and make sure you've looked in
all folders (e.g., Shared Contacts)?
[i]
installed the patch, KB918766.
Did you reboot after installing it?
Look OE Help About Files: What versions of MSOE.DLL, INETCOMM.DLL and
DIRECTDB.DLL are displayed here?
If all else fails, you should have an automatically created/maintained
backup of Address Book. It should have a WAB~ extension (e.g., Dan.wab~)
and it should be located in the same folder as your regular Address Book
(e.g., Dan.wab): Open the now-empty Address Book and click on Help About
to see the store folder where it resides, then look in that folder for it.
NB: In WinXP, Win2K and Win2K03, the OE user files (DBX and WAB) are by
default marked as hidden. To view these files in Windows Explorer, you must
enable Show Hidden Files and Folders under Start Control Panel Folder
Options View.
If you rename, e.g., Dan.wab~ to Dan1.wab (Do NOT rename it to the same name
as your regular Address Book!), you'll be able to open it. Do all contacts
appear in it? Are there close to 999 contacts? (You should be able to
import the contents of Dan1.wab into Dan.wab, but please do NOT attempt this
yet.)
References:
Backup & Restore OE Data
http://www.insideoe.com/backup/index.htm
http://www.oehelp.com/backup.aspx
OE Files & Settings
http://www.insideoe.com/files/index.htm
OE Registry Keys
http://www.insideoe.com/files/regkeys.htm
Importing OE Data (all DBX files, including Folders.dbx)
http://www.insideoe.com/faqs/how.htm#importOE5
NB: If you exported data to a CD or DVD, you cannot import directly from
there. And you backup set MUST include a file named Folders.dbx or the
import won't work.
--
~Robear Dyer (PA Bear)
MS MVP-Windows (IE/OE, Security, Shell/User)
Dan McGarigle wrote:
Here are your previous steps, and my results.
1. Disable email scanning by your anti-virus application. - My eTRust
Anti-V
never did scan any eMails.
2. Disabling Email Scanning does not leave you unprotected against viruses
that
are distributed as email attachments. Norton AntiVirus Auto-Protect scans
incoming files as they are saved to your hard drive............
I have not used ANY Symantec production more than a year, and never will
again. I use only CA eTrust anti-virus.
3. If the behavior persists, your current Identity may have been
damaged..........
I exported all my eMails. Then I exported my address book.
Then I created a new Identity and followed all the instructed steps and
installed the patch, KB918766.
Then I tried to import my messages and got an errorthat said that "an
error occured during
the import process", and no messages were imported to the new Identity.
The I returned to my old Main Identity. The same situation exists in
that all the emails are listed,
but when I open any of them the message text area is still all blank.
Also my address book is now empty, and when I tried to re-import it I
got a message that said that
"an error occured during the import process" and now my address book
is
completely empty
in both the Main and the New identity.
Now what boss ?
"PA Bear" wrote:
Also, there are no entries in "Add/Remove Programs" for either Internet
Explorer or Outlook Express.
No, and there shouldn't be. wink Both are integral parts of Windows.
1. Disable email scanning by your anti-virus application. It provides no
additional protection and even Symantec says it's not necessary:
paste
Disabling Email Scanning does not leave you unprotected against viruses
that are distributed as email attachments. Norton AntiVirus Auto-Protect
scans incoming files as they are saved to your hard drive, including
email
and email attachments. Email Scanning is just another layer on top of
this. To make sure that Auto-Protect is providing the maximum protection,
keep Auto-Protect enabled and run LiveUpdate regularly to ensure that you
have the most recent virus definitions.
/paste
http://service1.symantec.com/SUPPORT...02111812533106
2. If the behavior persists, your current Identity may have been damaged
by
the Email Scanning, especially if its the default Main Identity. Try one
or more of your accounts in a new Named Identity (File Identities Add
new identity). Assuming all is well, (1) compact all folders in the old
identity, (2) import messages from the old identity into the new one, and
then (3) delete the old one (File Identities Manage Identities).
To avoid such corruption in futu
- Don't use Inbox or Sent Items to archive messages. Move them to local
folders created for this purpose.
- Empty Deleted Items folder daily.
- Disable Background Compacting [N/A in SP2] and frequently perform a
manual compact of all OE folders while "working offline". More at
http://www.insideoe.com/files/maintain.htm
- WinXP SP2 only: Do not attempt to close OE via Task Manager or shutdown
your machine if Automatic Compacting is taking place.
- WinXP SP2 only: If your machine is fully up-to-date at Windows Update,
installing the following patch (KB918766) will help to avoid such data
loss
in the futu
http://www.microsoft.com/downloads/d...2-98af2256ccc3
This patch will be included in the next Cumulative Update for Outlook
Express/WinXP SP2.
- Your anti-virus application's email scanning feature can also cause
corruption. Disable it. It provides no additional protection.
--
~PA Bear
Dan McGarigle wrote:
Hello PA Bear !
My Windows version ? Windows XP Professional, with SP2; all updates
are
current.
OE Tools Options Security Block images... is NOT checked
OE Tools Options Read Read all messages in Plain text - is NOT
checked
Is your anti-virus configured to scan incoming & outgoing mail ? Yes,
but
how would that affect previously received messages, i.e. those received
month or year ago
which all display a "blank message text area" ? I can't see the contents
of
ANY emails, old or new today. I use Computer Associates "eTrust"
anti-virus.
Start Run (type in) regsvr32 inetcomm.dll [OK] & reboot = NO
BETTER.
Also, there are no entries in "Add/Remove Programs" for either Internet
Explorer or
Outlook Express.
Thanks PA Bear !
Dan
"PA Bear" wrote:
Windows version?
OE Tools Options Security Block images... (checked?)
OE Tools Options Read Read all messages in Plain text (checked?)
Is your anti-virus configured to scan incoming & outgoing mail?
Start Run (type in) regsvr32 inetcomm.dll [OK] & reboot Any
better?
--
~Robear Dyer (PA Bear)
MS MVP-Windows (IE/OE, Security, Shell/User)
Dan McGarigle wrote:
Today I received 12 new eMails. When I opened one of them, which
happened
to
by from my ISP, then the text area of the message is completely empty,
so
I
couldn't read the email from my ISP.
Then on the OE main menu of messages, I right clicked a message, and
went
through the messsage's Properties to the point where I was able to
read
the
"Message Text".
But, when I click on the messages, any of them, in the main OE 6 list
of
emails, then they all display "From", "Date" "To" and "Subject" in the
message display window, but the text area of any message that I open
is
a
completely empty and blank area.
This poroblem started just today around 1:00 PM. Earlier today I was
received emails and thir contents are displayed in each one's message
window
when I open them.
I cannot find any "option" that affects the display of message text.
What am I to do to display the contents of any message ?