A Microsoft Outlook email forum. Outlook Banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Outlook Banter forum » Microsoft Outlook Express Email Newsgroup » Outlook Express
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

dbx utilities



 
 
Thread Tools Search this Thread Display Modes
  #1  
Old August 1st 06, 07:25 PM posted to microsoft.public.windows.inetexplorer.ie6_outlookexpress
jd
external usenet poster
 
Posts: 4
Default dbx utilities

Anyone know of a utility which will read OE6 dbx files and output simple txt
files (full header + msg text) - I need to extract a lot of data and there
has to be something faster and easier than manual processing.

TIA

--
jd

remove the obvious to reply by email



Ads
  #2  
Old August 1st 06, 07:35 PM posted to microsoft.public.windows.inetexplorer.ie6_outlookexpress
Bruce Hagen
external usenet poster
 
Posts: 10,210
Default dbx utilities

Not sure what you are asking as Outlook Express is the utility that reads
the dbx files.

Perhaps you have something like this in mind?

DBXtract:
http://www.oehelp.com/DBXtract/Default.aspx

DBXpress: {much faster for large files}
http://www.oehelp.com/DBXpress/Default.aspx
--
Bruce Hagen
MS MVP - Outlook Express
~IB-CA~

"jd" wrote in message
...
Anyone know of a utility which will read OE6 dbx files and output simple
txt
files (full header + msg text) - I need to extract a lot of data and there
has to be something faster and easier than manual processing.

TIA

--
jd

remove the obvious to reply by email




  #3  
Old August 2nd 06, 12:32 AM posted to microsoft.public.windows.inetexplorer.ie6_outlookexpress
jd
external usenet poster
 
Posts: 4
Default dbx utilities

Thanks for the suggestion

These are for reading in OE6 - I want to trake the msgs stored in OE6 MBX
files and convert the whole file into a simple contiguous txt file that is
suitable for parsing.

--
David



|
| "jd" wrote in message
| ...
|| Anyone know of a utility which will read OE6 dbx files and output
|| simple txt
|| files (full header + msg text) - I need to extract a lot of data and
|| there has to be something faster and easier than manual processing.
||
|| TIA
||

In ,
Bruce Hagen spake thus :
| Not sure what you are asking as Outlook Express is the utility that
| reads the dbx files.
|
| Perhaps you have something like this in mind?
|
| DBXtract:
| http://www.oehelp.com/DBXtract/Default.aspx
|
| DBXpress: {much faster for large files}
| http://www.oehelp.com/DBXpress/Default.aspx


Thanks for the suggestion

These are for reading/repairing in OE6 - I want to take the msgs stored in
OE6 MBX files and convert the whole file into a simple contiguous txt file
that is suitable for parsing.

--
David


  #4  
Old August 2nd 06, 03:42 AM posted to microsoft.public.windows.inetexplorer.ie6_outlookexpress
Michael Santovec
external usenet poster
 
Posts: 2,875
Default dbx utilities

Not sure if you have a typo there. Your subject and original message
mention DBX. Now you mention MBX.

OE5 and above use DBX files. MBX files are from OE4.

There are utilities for MBX files as well, it that's what you really
have are some old OE4 files.

- OUTDUMP for IE3 Internet Mail and IE4 Outlook Express *.MBX files.
(also includes EML2TXT.BAT)
http://pages.prodigy.net/michael_san...es/outdump.zip
- MBXtract for IE4 Outlook Express *.MBX files.
MBXtract - http://www.oehelp.com/MBXtract/Default.aspx

All the DBX and MBX extract programs produce EML files. These are
simple text files with full headers.

But you can also use Drag-and-Drop to save multiple e-mail messages at a
time.

- Open the Windows File Explorer to the folder (directory) that you
want to save the messages to (e.g. C:\EML-TEMP). For minimal confusion,
the folder should be empty or only used for saving mail messages.
- In Outlook Express highlight the desired messages (Ctrl-Click or
Shift-Click)
- While holding down the Left mouse button, drag the messages to the
Explorer window. If the Explorer window is not visible, drag to the
Taskbar button for Explorer, keep holding the left mouse button down
until Explorer moves to the front, then complete the drag to the
Explorer window and then release the Left mouse button.
- Complication: Messages are saved as *.EML files where the first part
of the file name is the message's subject. If you save multiple
messages in one drag-and drop operation, OE will automatically number
the subsequent messages with identical subject to make the name unique.
But if you later save additional messages with the same subject it will
start the numbering process over again and you will get a "Confirm File
Replace" dialog for the duplicate names. When this happens, leave the
confirm dialog and switch to the Windows File Explorer. Rename the
first file (e.g. rename "The Subject.EML" to "The Subject-1.EML"). Then
switch back to the Confirm dialog and click on YES. The new message
will get saved with the original name and the previous message will
still be there with the new name.
- You can then use the EML2TXT.BAT file (see above) to combine the
*.EML messages into a single Text file. You will probably want to make
some changes, such as the EML directory. See the comments (REM
statements) in the file.


--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm


"jd" wrote in message
...
Thanks for the suggestion

These are for reading in OE6 - I want to trake the msgs stored in OE6
MBX
files and convert the whole file into a simple contiguous txt file
that is
suitable for parsing.

--
David



|
| "jd" wrote in message
| ...
|| Anyone know of a utility which will read OE6 dbx files and output
|| simple txt
|| files (full header + msg text) - I need to extract a lot of data
and
|| there has to be something faster and easier than manual processing.
||
|| TIA
||

In ,
Bruce Hagen spake thus :
| Not sure what you are asking as Outlook Express is the utility that
| reads the dbx files.
|
| Perhaps you have something like this in mind?
|
| DBXtract:
| http://www.oehelp.com/DBXtract/Default.aspx
|
| DBXpress: {much faster for large files}
| http://www.oehelp.com/DBXpress/Default.aspx


Thanks for the suggestion

These are for reading/repairing in OE6 - I want to take the msgs
stored in
OE6 MBX files and convert the whole file into a simple contiguous txt
file
that is suitable for parsing.

--
David




  #5  
Old August 2nd 06, 10:54 AM posted to microsoft.public.windows.inetexplorer.ie6_outlookexpress
jd
external usenet poster
 
Posts: 4
Default dbx utilities

In ,
Michael Santovec spake thus :
| Not sure if you have a typo there. Your subject and original message
| mention DBX. Now you mention MBX.
|
| OE5 and above use DBX files. MBX files are from OE4.
|
| There are utilities for MBX files as well, it that's what you really
| have are some old OE4 files.
|
| - OUTDUMP for IE3 Internet Mail and IE4 Outlook Express *.MBX files.
| (also includes EML2TXT.BAT)
| http://pages.prodigy.net/michael_san...es/outdump.zip
| - MBXtract for IE4 Outlook Express *.MBX files.
| MBXtract - http://www.oehelp.com/MBXtract/Default.aspx
|
| All the DBX and MBX extract programs produce EML files. These are
| simple text files with full headers.
|
| But you can also use Drag-and-Drop to save multiple e-mail messages
| at a time.
|
| - Open the Windows File Explorer to the folder (directory) that you
| want to save the messages to (e.g. C:\EML-TEMP). For minimal
| confusion, the folder should be empty or only used for saving mail
| messages. - In Outlook Express highlight the desired messages
| (Ctrl-Click or Shift-Click)
| - While holding down the Left mouse button, drag the messages to the
| Explorer window. If the Explorer window is not visible, drag to the
| Taskbar button for Explorer, keep holding the left mouse button down
| until Explorer moves to the front, then complete the drag to the
| Explorer window and then release the Left mouse button.
| - Complication: Messages are saved as *.EML files where the first part
| of the file name is the message's subject. If you save multiple
| messages in one drag-and drop operation, OE will automatically number
| the subsequent messages with identical subject to make the name
| unique. But if you later save additional messages with the same
| subject it will start the numbering process over again and you will
| get a "Confirm File Replace" dialog for the duplicate names. When
| this happens, leave the confirm dialog and switch to the Windows File
| Explorer. Rename the first file (e.g. rename "The Subject.EML" to
| "The Subject-1.EML"). Then switch back to the Confirm dialog and
| click on YES. The new message will get saved with the original name
| and the previous message will still be there with the new name.
| - You can then use the EML2TXT.BAT file (see above) to combine the
| *.EML messages into a single Text file. You will probably want to
| make some changes, such as the EML directory. See the comments (REM
| statements) in the file.
|
| ||
||
|||
||| "jd" wrote in message
||| ...
|||| Anyone know of a utility which will read OE6 dbx files and output
|||| simple txt
|||| files (full header + msg text) - I need to extract a lot of data
|||| and there has to be something faster and easier than manual
|||| processing.
||||
|||| TIA
||||
||
|| In ,
|| Bruce Hagen spake thus :
||| Not sure what you are asking as Outlook Express is the utility that
||| reads the dbx files.
|||
||| Perhaps you have something like this in mind?
|||
||| DBXtract:
||| http://www.oehelp.com/DBXtract/Default.aspx
|||
||| DBXpress: {much faster for large files}
||| http://www.oehelp.com/DBXpress/Default.aspx
||
||
| "jd" wrote in message
| ...


|| Thanks for the suggestion
||
|| These are for reading/repairing in OE6 - I want to take the msgs
|| stored in
|| OE6 MBX files and convert the whole file into a simple contiguous txt
|| file
|| that is suitable for parsing.
||
|| --
|| David

In ,
Michael Santovec spake thus :
| Not sure if you have a typo there. Your subject and original message
| mention DBX. Now you mention MBX.
|
| OE5 and above use DBX files. MBX files are from OE4.
|
| There are utilities for MBX files as well, it that's what you really
| have are some old OE4 files.
|
| - OUTDUMP for IE3 Internet Mail and IE4 Outlook Express *.MBX files.
| (also includes EML2TXT.BAT)
| http://pages.prodigy.net/michael_san...es/outdump.zip
| - MBXtract for IE4 Outlook Express *.MBX files.
| MBXtract - http://www.oehelp.com/MBXtract/Default.aspx
|
| All the DBX and MBX extract programs produce EML files. These are
| simple text files with full headers.
|
| But you can also use Drag-and-Drop to save multiple e-mail messages
| at a time.
|
| - Open the Windows File Explorer to the folder (directory) that you
| want to save the messages to (e.g. C:\EML-TEMP). For minimal
| confusion, the folder should be empty or only used for saving mail
| messages. - In Outlook Express highlight the desired messages
| (Ctrl-Click or Shift-Click)
| - While holding down the Left mouse button, drag the messages to the
| Explorer window. If the Explorer window is not visible, drag to the
| Taskbar button for Explorer, keep holding the left mouse button down
| until Explorer moves to the front, then complete the drag to the
| Explorer window and then release the Left mouse button.
| - Complication: Messages are saved as *.EML files where the first part
| of the file name is the message's subject. If you save multiple
| messages in one drag-and drop operation, OE will automatically number
| the subsequent messages with identical subject to make the name
| unique. But if you later save additional messages with the same
| subject it will start the numbering process over again and you will
| get a "Confirm File Replace" dialog for the duplicate names. When
| this happens, leave the confirm dialog and switch to the Windows File
| Explorer. Rename the first file (e.g. rename "The Subject.EML" to
| "The Subject-1.EML"). Then switch back to the Confirm dialog and
| click on YES. The new message will get saved with the original name
| and the previous message will still be there with the new name.
| - You can then use the EML2TXT.BAT file (see above) to combine the
| *.EML messages into a single Text file. You will probably want to
| make some changes, such as the EML directory. See the comments (REM
| statements) in the file.

Apologies - I did mean DBX/OE6 files as originally stated - must have been a
senior moment ;-)

Thans for the help

--
David




  #6  
Old August 2nd 06, 11:16 AM posted to microsoft.public.windows.inetexplorer.ie6_outlookexpress
Steve Cochran
external usenet poster
 
Posts: 2,353
Default dbx utilities

You could use DBXpress to output the individual messages from the dbx file
and then to get a single file just

copy *.eml onefile.txt

steve

"jd" wrote in message
...
Thanks for the suggestion

These are for reading in OE6 - I want to trake the msgs stored in OE6 MBX
files and convert the whole file into a simple contiguous txt file that is
suitable for parsing.

--
David



|
| "jd" wrote in message
| ...
|| Anyone know of a utility which will read OE6 dbx files and output
|| simple txt
|| files (full header + msg text) - I need to extract a lot of data and
|| there has to be something faster and easier than manual processing.
||
|| TIA
||

In ,
Bruce Hagen spake thus :
| Not sure what you are asking as Outlook Express is the utility that
| reads the dbx files.
|
| Perhaps you have something like this in mind?
|
| DBXtract:
| http://www.oehelp.com/DBXtract/Default.aspx
|
| DBXpress: {much faster for large files}
| http://www.oehelp.com/DBXpress/Default.aspx


Thanks for the suggestion

These are for reading/repairing in OE6 - I want to take the msgs stored in
OE6 MBX files and convert the whole file into a simple contiguous txt file
that is suitable for parsing.

--
David



  #7  
Old August 7th 06, 12:46 PM posted to microsoft.public.windows.inetexplorer.ie6_outlookexpress
Emily R. Harris
external usenet poster
 
Posts: 12
Default dbx utilities

jd wrote:
Thanks for the suggestion

These are for reading in OE6 - I want to trake the msgs stored in OE6 MBX
files and convert the whole file into a simple contiguous txt file that is
suitable for parsing.

Your welcome. How are you today? Good I hope
 




Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
.dbx to outlook Brian Tillman Outlook - General Queries 3 June 17th 06 01:01 AM
.dbx all gone eric Outlook Express 8 April 1st 06 02:34 PM
.dbx problem Marijana Govorcin Outlook Express 15 February 15th 06 04:56 PM
Utilities for Importing Data into O2003 srm Outlook - General Queries 2 February 7th 06 05:32 PM
DBX Files Dave Outlook Express 4 January 14th 06 12:39 AM


All times are GMT +1. The time now is 07:54 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.Search Engine Friendly URLs by vBSEO 2.4.0
Copyright ©2004-2025 Outlook Banter.
The comments are property of their posters.