![]() |
Cannot send emails
Out of the blue I now cannot send emails and get the following message:
The message could not be sent because one of the recipients was rejected by the server. The rejected e-mail address was '. Subject 'Troubleshooting - Easydrive & Motorola V545', Account: 'pop.tiscali.co.uk', Server: 'smtp.dsl.pipex.com', Protocol: SMTP, Server Response: '554 : Relay access denied', Port: 25, Secure(SSL): No, Server Error: 554, Error Number: 0x800CCC79 Can anyone help? Axel |
Cannot send emails
Two possibilities. Do you have multiple accounts? You are sending from
pipex.com and trying to go through tiscali. This is a generic Relay Not Allowed message. See: http://www.insideoe.com/problems/errors.htm#relay550 Also check your accounts settings and make sure they haven't been changed to either Localhost, or 127.0.0.1. -- Bruce Hagen MS MVP - Outlook Express ~IB-CA~ "Axel" wrote in message ... Out of the blue I now cannot send emails and get the following message: The message could not be sent because one of the recipients was rejected by the server. The rejected e-mail address was '. Subject 'Troubleshooting - Easydrive & Motorola V545', Account: 'pop.tiscali.co.uk', Server: 'smtp.dsl.pipex.com', Protocol: SMTP, Server Response: '554 : Relay access denied', Port: 25, Secure(SSL): No, Server Error: 554, Error Number: 0x800CCC79 Can anyone help? Axel |
Cannot send emails
What is happening is that you are trying to send Tiscali & Lineone mail
through Pipex, and they do not allow this. It could very well be a recent change of policy by Pipex. The best way to check that is to give them a call. ISPs do make changes like this from time to time. -- Bruce Hagen MS MVP - Outlook Express ~IB-CA~ "Axel" wrote in message ... Yes, I have three accounts. (also my ISP) I have been using all of these accounts and the same ISP for about two years with no problems, but something recently changed. For some reason my default email programme changed to Outlook. I changed it back to Outlook Express and then the problems. The problem is only with the outgoing emails from the lineone and tiscali accounts, and probably with the smpt server address. Should this be pipex or tiscali/lineone? Axel "Bruce Hagen" wrote in message ... Two possibilities. Do you have multiple accounts? You are sending from pipex.com and trying to go through tiscali. This is a generic Relay Not Allowed message. See: http://www.insideoe.com/problems/errors.htm#relay550 Also check your accounts settings and make sure they haven't been changed to either Localhost, or 127.0.0.1. -- Bruce Hagen MS MVP - Outlook Express ~IB-CA~ "Axel" wrote in message ... Out of the blue I now cannot send emails and get the following message: The message could not be sent because one of the recipients was rejected by the server. The rejected e-mail address was '. Subject 'Troubleshooting - Easydrive & Motorola V545', Account: 'pop.tiscali.co.uk', Server: 'smtp.dsl.pipex.com', Protocol: SMTP, Server Response: '554 : Relay access denied', Port: 25, Secure(SSL): No, Server Error: 554, Error Number: 0x800CCC79 Can anyone help? Axel |
Cannot send emails
Hi Bruce,
I have made some enquiries and there appears to have been no change in policy with Pipex and they do not block other ISPs mail. Further investigation as follows. If I change the outgoing server to Pipex for the Tiscali & Lineone accounts it will not accept the Lineone and Tiscali user names and passwords. I have never had to change these user names and passwords and they have been in place for many years and for the past two years with Pipex. My outgoing smtp severs must have been lineone & tiscali but now I am getting the error message 0x800CCC0B. Any suggestions? Axel "Bruce Hagen" wrote in message ... What is happening is that you are trying to send Tiscali & Lineone mail through Pipex, and they do not allow this. It could very well be a recent change of policy by Pipex. The best way to check that is to give them a call. ISPs do make changes like this from time to time. -- Bruce Hagen MS MVP - Outlook Express ~IB-CA~ "Axel" wrote in message ... Yes, I have three accounts. (also my ISP) I have been using all of these accounts and the same ISP for about two years with no problems, but something recently changed. For some reason my default email programme changed to Outlook. I changed it back to Outlook Express and then the problems. The problem is only with the outgoing emails from the lineone and tiscali accounts, and probably with the smpt server address. Should this be pipex or tiscali/lineone? Axel "Bruce Hagen" wrote in message ... Two possibilities. Do you have multiple accounts? You are sending from pipex.com and trying to go through tiscali. This is a generic Relay Not Allowed message. See: http://www.insideoe.com/problems/errors.htm#relay550 Also check your accounts settings and make sure they haven't been changed to either Localhost, or 127.0.0.1. -- Bruce Hagen MS MVP - Outlook Express ~IB-CA~ "Axel" wrote in message ... Out of the blue I now cannot send emails and get the following message: The message could not be sent because one of the recipients was rejected by the server. The rejected e-mail address was '. Subject 'Troubleshooting - Easydrive & Motorola V545', Account: 'pop.tiscali.co.uk', Server: 'smtp.dsl.pipex.com', Protocol: SMTP, Server Response: '554 : Relay access denied', Port: 25, Secure(SSL): No, Server Error: 554, Error Number: 0x800CCC79 Can anyone help? Axel |
Cannot send emails
Axel.
I don't have the answer for you. It seems to be snowballing. Keep checking back. Hopefully someone will have a better suggestion. -- Bruce Hagen MS MVP - Outlook Express ~IB-CA~ "Axel" wrote in message ... Hi Bruce, I have made some enquiries and there appears to have been no change in policy with Pipex and they do not block other ISPs mail. Further investigation as follows. If I change the outgoing server to Pipex for the Tiscali & Lineone accounts it will not accept the Lineone and Tiscali user names and passwords. I have never had to change these user names and passwords and they have been in place for many years and for the past two years with Pipex. My outgoing smtp severs must have been lineone & tiscali but now I am getting the error message 0x800CCC0B. Any suggestions? Axel "Bruce Hagen" wrote in message ... What is happening is that you are trying to send Tiscali & Lineone mail through Pipex, and they do not allow this. It could very well be a recent change of policy by Pipex. The best way to check that is to give them a call. ISPs do make changes like this from time to time. -- Bruce Hagen MS MVP - Outlook Express ~IB-CA~ "Axel" wrote in message ... Yes, I have three accounts. (also my ISP) I have been using all of these accounts and the same ISP for about two years with no problems, but something recently changed. For some reason my default email programme changed to Outlook. I changed it back to Outlook Express and then the problems. The problem is only with the outgoing emails from the lineone and tiscali accounts, and probably with the smpt server address. Should this be pipex or tiscali/lineone? Axel "Bruce Hagen" wrote in message ... Two possibilities. Do you have multiple accounts? You are sending from pipex.com and trying to go through tiscali. This is a generic Relay Not Allowed message. See: http://www.insideoe.com/problems/errors.htm#relay550 Also check your accounts settings and make sure they haven't been changed to either Localhost, or 127.0.0.1. -- Bruce Hagen MS MVP - Outlook Express ~IB-CA~ "Axel" wrote in message ... Out of the blue I now cannot send emails and get the following message: The message could not be sent because one of the recipients was rejected by the server. The rejected e-mail address was '. Subject 'Troubleshooting - Easydrive & Motorola V545', Account: 'pop.tiscali.co.uk', Server: 'smtp.dsl.pipex.com', Protocol: SMTP, Server Response: '554 : Relay access denied', Port: 25, Secure(SSL): No, Server Error: 554, Error Number: 0x800CCC79 Can anyone help? Axel |
Cannot send emails
For outgoing -
You can use both the Tiscali and Lineone email addresses, but the server should be configured for Pipex, and you'll have to use the User name and password for your Pipex account to connect. For incoming you can use the Tiscali and Lineone servers. -- Kath Adams MS MVP - Windows (Outlook Express) Axel wrote: Hi Bruce, I have made some enquiries and there appears to have been no change in policy with Pipex and they do not block other ISPs mail. Further investigation as follows. If I change the outgoing server to Pipex for the Tiscali & Lineone accounts it will not accept the Lineone and Tiscali user names and passwords. I have never had to change these user names and passwords and they have been in place for many years and for the past two years with Pipex. My outgoing smtp severs must have been lineone & tiscali but now I am getting the error message 0x800CCC0B. Any suggestions? Axel "Bruce Hagen" wrote in message ... What is happening is that you are trying to send Tiscali & Lineone mail through Pipex, and they do not allow this. It could very well be a recent change of policy by Pipex. The best way to check that is to give them a call. ISPs do make changes like this from time to time. -- Bruce Hagen MS MVP - Outlook Express ~IB-CA~ "Axel" wrote in message ... Yes, I have three accounts. (also my ISP) I have been using all of these accounts and the same ISP for about two years with no problems, but something recently changed. For some reason my default email programme changed to Outlook. I changed it back to Outlook Express and then the problems. The problem is only with the outgoing emails from the lineone and tiscali accounts, and probably with the smpt server address. Should this be pipex or tiscali/lineone? Axel "Bruce Hagen" wrote in message ... Two possibilities. Do you have multiple accounts? You are sending from pipex.com and trying to go through tiscali. This is a generic Relay Not Allowed message. See: http://www.insideoe.com/problems/errors.htm#relay550 Also check your accounts settings and make sure they haven't been changed to either Localhost, or 127.0.0.1. -- Bruce Hagen MS MVP - Outlook Express ~IB-CA~ "Axel" wrote in message ... Out of the blue I now cannot send emails and get the following message: The message could not be sent because one of the recipients was rejected by the server. The rejected e-mail address was '. Subject 'Troubleshooting - Easydrive & Motorola V545', Account: 'pop.tiscali.co.uk', Server: 'smtp.dsl.pipex.com', Protocol: SMTP, Server Response: '554 : Relay access denied', Port: 25, Secure(SSL): No, Server Error: 554, Error Number: 0x800CCC79 Can anyone help? Axel |
Cannot send emails
Yes, problem now resolved.
Outgoing MUST be configured to your current ISP that you make the connection with. Axel "Kath Adams" wrote in message ... For outgoing - You can use both the Tiscali and Lineone email addresses, but the server should be configured for Pipex, and you'll have to use the User name and password for your Pipex account to connect. For incoming you can use the Tiscali and Lineone servers. -- Kath Adams MS MVP - Windows (Outlook Express) Axel wrote: Hi Bruce, I have made some enquiries and there appears to have been no change in policy with Pipex and they do not block other ISPs mail. Further investigation as follows. If I change the outgoing server to Pipex for the Tiscali & Lineone accounts it will not accept the Lineone and Tiscali user names and passwords. I have never had to change these user names and passwords and they have been in place for many years and for the past two years with Pipex. My outgoing smtp severs must have been lineone & tiscali but now I am getting the error message 0x800CCC0B. Any suggestions? Axel "Bruce Hagen" wrote in message ... What is happening is that you are trying to send Tiscali & Lineone mail through Pipex, and they do not allow this. It could very well be a recent change of policy by Pipex. The best way to check that is to give them a call. ISPs do make changes like this from time to time. -- Bruce Hagen MS MVP - Outlook Express ~IB-CA~ "Axel" wrote in message ... Yes, I have three accounts. (also my ISP) I have been using all of these accounts and the same ISP for about two years with no problems, but something recently changed. For some reason my default email programme changed to Outlook. I changed it back to Outlook Express and then the problems. The problem is only with the outgoing emails from the lineone and tiscali accounts, and probably with the smpt server address. Should this be pipex or tiscali/lineone? Axel "Bruce Hagen" wrote in message ... Two possibilities. Do you have multiple accounts? You are sending from pipex.com and trying to go through tiscali. This is a generic Relay Not Allowed message. See: http://www.insideoe.com/problems/errors.htm#relay550 Also check your accounts settings and make sure they haven't been changed to either Localhost, or 127.0.0.1. -- Bruce Hagen MS MVP - Outlook Express ~IB-CA~ "Axel" wrote in message ... Out of the blue I now cannot send emails and get the following message: The message could not be sent because one of the recipients was rejected by the server. The rejected e-mail address was '. Subject 'Troubleshooting - Easydrive & Motorola V545', Account: 'pop.tiscali.co.uk', Server: 'smtp.dsl.pipex.com', Protocol: SMTP, Server Response: '554 : Relay access denied', Port: 25, Secure(SSL): No, Server Error: 554, Error Number: 0x800CCC79 Can anyone help? Axel |
All times are GMT +1. The time now is 07:54 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 2.4.0
Copyright ©2004-2006 OutlookBanter.com