Clicking URLs doesn't work
 

All of a sudden, when I click on URLs in the body of an email nothing
happens. please advise.

Clicking URLs doesn't work
 

From:
http://www.fjsmjs.com/OE/nolinks.htm

If nothing happens when you click a link:
Open Windows Explorer.
Go to Tools | Folder Options | File Types.
Scroll down to URL:HyperText Transfer Protocol and select it.
Click Edit or Advanced, depending on your Windows version.
Select 'open'.
Click Edit.

"Application used to perform this action" should read:

"C:\PROGRAM FILES\INTERNET EXPLORER\iexplore.exe" -nohome
(Check the path to iexplore.exe to make sure that is correct and use the
double quotes.)

DDE should be checked and in the boxes below it you should have:

#1:
"%1",,-1,0,,,,
#2
IExplore
#3 (blank)

#4
WWW_OpenURL

URL:HyperText Transfer Protocol with Privacy should be the same.

Sometimes it is necessary to uncheck Use DDE.



If you get a blank page:


1. Click Start, and then click Run.

2. In the Open box, type:

regsvr32 urlmon.dll

3. Click OK, and then click OK again when you receive the following message:

DllRegisterServer in urlmon.dll succeeded.


4. If that doesn't fix it, see this article:

http://www.mvps.org/inetexplorer/answers.htm#new_window

5. If you are using WinXP try this:
http://www.mvps.org/sramesh2k/reg/IE...lt_Browser.reg


You can also try this:

Go to Start/run, and type SFC (msconfig for WinXP).
Choose 'Extract One File From Installation Disk' ("Expand File" for WinXP).
Type oleaut32.dll, not worrying about its location. Then, click Start.

Next to 'Restore From', type in or browse for the file's location, which is
probably in the Win98 (i386 for WinXP) folder of your installation CD-ROM
(typically D:\Win98), or in your Windows\Options\Cabs (Windows\i386 for
WinXP) folder, as the case may be.

Then, next to 'Save File In', enter C:\Windows\System (C:\Windows\System32
for WinXP), and click OK. System File Checker (or msconfig) looks for the
file, saves it as you requested, and then tells you that 'the file has been
successfully extracted'.

You may need to reboot.
--
Bruce Hagen
MS MVP - Outlook Express
~IB-CA~

"M Weiss" wrote in message
...
All of a sudden, when I click on URLs in the body of an email nothing
happens. please advise.

Clicking URLs doesn't work
 

Hi Bruce: I had a similar problem here in news-groups. Un-checked DDE as
you suggested & that solved my problem. Is there any harm in leaving it
un-chedked ? Thanks Gimpy



"Bruce Hagen" wrote in message
...
From:
http://www.fjsmjs.com/OE/nolinks.htm

If nothing happens when you click a link:
Open Windows Explorer.
Go to Tools | Folder Options | File Types.
Scroll down to URL:HyperText Transfer Protocol and select it.
Click Edit or Advanced, depending on your Windows version.
Select 'open'.
Click Edit.

"Application used to perform this action" should read:

"C:\PROGRAM FILES\INTERNET EXPLORER\iexplore.exe" -nohome
(Check the path to iexplore.exe to make sure that is correct and use the
double quotes.)

DDE should be checked and in the boxes below it you should have:

#1:
"%1",,-1,0,,,,
#2
IExplore
#3 (blank)

#4
WWW_OpenURL

URL:HyperText Transfer Protocol with Privacy should be the same.

Sometimes it is necessary to uncheck Use DDE.



If you get a blank page:


1. Click Start, and then click Run.

2. In the Open box, type:

regsvr32 urlmon.dll

3. Click OK, and then click OK again when you receive the following
message:

DllRegisterServer in urlmon.dll succeeded.


4. If that doesn't fix it, see this article:

http://www.mvps.org/inetexplorer/answers.htm#new_window

5. If you are using WinXP try this:
http://www.mvps.org/sramesh2k/reg/IE...lt_Browser.reg


You can also try this:

Go to Start/run, and type SFC (msconfig for WinXP).
Choose 'Extract One File From Installation Disk' ("Expand File" for
WinXP).
Type oleaut32.dll, not worrying about its location. Then, click Start.

Next to 'Restore From', type in or browse for the file's location, which
is probably in the Win98 (i386 for WinXP) folder of your installation
CD-ROM (typically D:\Win98), or in your Windows\Options\Cabs (Windows\i386
for WinXP) folder, as the case may be.

Then, next to 'Save File In', enter C:\Windows\System (C:\Windows\System32
for WinXP), and click OK. System File Checker (or msconfig) looks for the
file, saves it as you requested, and then tells you that 'the file has
been successfully extracted'.

You may need to reboot.
--
Bruce Hagen
MS MVP - Outlook Express
~IB-CA~

"M Weiss" wrote in message
...
All of a sudden, when I click on URLs in the body of an email nothing
happens. please advise.

Clicking URLs doesn't work
 

"Gimpy" wrote in message

Hi Bruce: I had a similar problem here in news-groups. Un-checked
DDE as you suggested & that solved my problem. Is there any harm in
leaving it un-chedked ? Thanks Gimpy



"Bruce Hagen" wrote in message
...
From:
http://www.fjsmjs.com/OE/nolinks.htm

If nothing happens when you click a link:
Open Windows Explorer.
Go to Tools | Folder Options | File Types.
Scroll down to URL:HyperText Transfer Protocol and select it.
Click Edit or Advanced, depending on your Windows version.
Select 'open'.
Click Edit.

"Application used to perform this action" should read:

"C:\PROGRAM FILES\INTERNET EXPLORER\iexplore.exe" -nohome
(Check the path to iexplore.exe to make sure that is correct and use
the double quotes.)

DDE should be checked and in the boxes below it you should have:

#1:
"%1",,-1,0,,,,
#2
IExplore
#3 (blank)

#4
WWW_OpenURL

URL:HyperText Transfer Protocol with Privacy should be the same.

Sometimes it is necessary to uncheck Use DDE.



If you get a blank page:


1. Click Start, and then click Run.

2. In the Open box, type:

regsvr32 urlmon.dll

3. Click OK, and then click OK again when you receive the following
message:

DllRegisterServer in urlmon.dll succeeded.


4. If that doesn't fix it, see this article:

http://www.mvps.org/inetexplorer/answers.htm#new_window

5. If you are using WinXP try this:
http://www.mvps.org/sramesh2k/reg/IE...lt_Browser.reg


You can also try this:

Go to Start/run, and type SFC (msconfig for WinXP).
Choose 'Extract One File From Installation Disk' ("Expand File" for
WinXP).
Type oleaut32.dll, not worrying about its location. Then, click
Start. Next to 'Restore From', type in or browse for the file's location,
which is probably in the Win98 (i386 for WinXP) folder of your
installation CD-ROM (typically D:\Win98), or in your
Windows\Options\Cabs (Windows\i386 for WinXP) folder, as the case
may be. Then, next to 'Save File In', enter C:\Windows\System
(C:\Windows\System32 for WinXP), and click OK. System File Checker
(or msconfig) looks for the file, saves it as you requested, and
then tells you that 'the file has been successfully extracted'.

You may need to reboot.
--
Bruce Hagen
MS MVP - Outlook Express
~IB-CA~

"M Weiss" wrote in message
...
All of a sudden, when I click on URLs in the body of an email
nothing happens. please advise.

It really is supposed to be checked, and needing it to be unchecked means
that something is wrong somewhere on the computer. However, I have never
heard of any ill effects from leaving it unchecked.

--
Frank Saunders, MS-MVP OE/WM
Please respond in Newsgroup. Do not send email
http://www.fjsmjs.com
Protect your PC
http://www.microsoft.com/security/protect/

Clicking URLs doesn't work
 

Bruce,

I did not mention that the problem exists only with Outlook Express. No
problem with links in Internet Explorer.

I tried your advise anyway. But in Tools|Folder Options|File Types I only
have URL Internet Shortcut (no Hypertext).

Mo


"Bruce Hagen" wrote in message
...
From:
http://www.fjsmjs.com/OE/nolinks.htm

If nothing happens when you click a link:
Open Windows Explorer.
Go to Tools | Folder Options | File Types.
Scroll down to URL:HyperText Transfer Protocol and select it.
Click Edit or Advanced, depending on your Windows version.
Select 'open'.
Click Edit.

"Application used to perform this action" should read:

"C:\PROGRAM FILES\INTERNET EXPLORER\iexplore.exe" -nohome
(Check the path to iexplore.exe to make sure that is correct and use the
double quotes.)

DDE should be checked and in the boxes below it you should have:

#1:
"%1",,-1,0,,,,
#2
IExplore
#3 (blank)

#4
WWW_OpenURL

URL:HyperText Transfer Protocol with Privacy should be the same.

Sometimes it is necessary to uncheck Use DDE.



If you get a blank page:


1. Click Start, and then click Run.

2. In the Open box, type:

regsvr32 urlmon.dll

3. Click OK, and then click OK again when you receive the following
message:

DllRegisterServer in urlmon.dll succeeded.


4. If that doesn't fix it, see this article:

http://www.mvps.org/inetexplorer/answers.htm#new_window

5. If you are using WinXP try this:
http://www.mvps.org/sramesh2k/reg/IE...lt_Browser.reg


You can also try this:

Go to Start/run, and type SFC (msconfig for WinXP).
Choose 'Extract One File From Installation Disk' ("Expand File" for
WinXP).
Type oleaut32.dll, not worrying about its location. Then, click Start.

Next to 'Restore From', type in or browse for the file's location, which
is probably in the Win98 (i386 for WinXP) folder of your installation
CD-ROM (typically D:\Win98), or in your Windows\Options\Cabs (Windows\i386
for WinXP) folder, as the case may be.

Then, next to 'Save File In', enter C:\Windows\System (C:\Windows\System32
for WinXP), and click OK. System File Checker (or msconfig) looks for the
file, saves it as you requested, and then tells you that 'the file has
been successfully extracted'.

You may need to reboot.
--
Bruce Hagen
MS MVP - Outlook Express
~IB-CA~

"M Weiss" wrote in message
...
All of a sudden, when I click on URLs in the body of an email nothing
happens. please advise.

Clicking URLs doesn't work
 

You have it. Look Closer. See the attached screen shot.
--
Bruce Hagen
MS MVP - Outlook Express
~IB-CA~

"M Weiss" wrote in message
...
Bruce,

I did not mention that the problem exists only with Outlook Express. No
problem with links in Internet Explorer.

I tried your advise anyway. But in Tools|Folder Options|File Types I only
have URL Internet Shortcut (no Hypertext).

Mo


"Bruce Hagen" wrote in message
...
From:
http://www.fjsmjs.com/OE/nolinks.htm

If nothing happens when you click a link:
Open Windows Explorer.
Go to Tools | Folder Options | File Types.
Scroll down to URL:HyperText Transfer Protocol and select it.
Click Edit or Advanced, depending on your Windows version.
Select 'open'.
Click Edit.

"Application used to perform this action" should read:

"C:\PROGRAM FILES\INTERNET EXPLORER\iexplore.exe" -nohome
(Check the path to iexplore.exe to make sure that is correct and use the
double quotes.)

DDE should be checked and in the boxes below it you should have:

#1:
"%1",,-1,0,,,,
#2
IExplore
#3 (blank)

#4
WWW_OpenURL

URL:HyperText Transfer Protocol with Privacy should be the same.

Sometimes it is necessary to uncheck Use DDE.



If you get a blank page:


1. Click Start, and then click Run.

2. In the Open box, type:

regsvr32 urlmon.dll

3. Click OK, and then click OK again when you receive the following
message:

DllRegisterServer in urlmon.dll succeeded.


4. If that doesn't fix it, see this article:

http://www.mvps.org/inetexplorer/answers.htm#new_window

5. If you are using WinXP try this:
http://www.mvps.org/sramesh2k/reg/IE...lt_Browser.reg


You can also try this:

Go to Start/run, and type SFC (msconfig for WinXP).
Choose 'Extract One File From Installation Disk' ("Expand File" for
WinXP).
Type oleaut32.dll, not worrying about its location. Then, click Start.

Next to 'Restore From', type in or browse for the file's location, which
is probably in the Win98 (i386 for WinXP) folder of your installation
CD-ROM (typically D:\Win98), or in your Windows\Options\Cabs
(Windows\i386 for WinXP) folder, as the case may be.

Then, next to 'Save File In', enter C:\Windows\System
(C:\Windows\System32 for WinXP), and click OK. System File Checker (or
msconfig) looks for the file, saves it as you requested, and then tells
you that 'the file has been successfully extracted'.

You may need to reboot.
--
Bruce Hagen
MS MVP - Outlook Express
~IB-CA~

"M Weiss" wrote in message
...
All of a sudden, when I click on URLs in the body of an email nothing
happens. please advise.

Clicking URLs doesn't work
 

Hello to all. I had the same problem discussed and did as all suggested.
Finally got the problem fixed by editing the registry as per the following:
http://support.microsoft.com/?kbid=306098
Though DllPath was present on my system. I deleted it and created it anew as
per step #5
Still have not found out what caused the problem in the first place. But it
is fixed now. links, send links, send page and new message now work.
regards,
JB




"Bruce Hagen" wrote:

You have it. Look Closer. See the attached screen shot.
--
Bruce Hagen
MS MVP - Outlook Express
~IB-CA~

"M Weiss" wrote in message
...
Bruce,

I did not mention that the problem exists only with Outlook Express. No
problem with links in Internet Explorer.

I tried your advise anyway. But in Tools|Folder Options|File Types I only
have URL Internet Shortcut (no Hypertext).

Mo


"Bruce Hagen" wrote in message
...
From:
http://www.fjsmjs.com/OE/nolinks.htm

If nothing happens when you click a link:
Open Windows Explorer.
Go to Tools | Folder Options | File Types.
Scroll down to URL:HyperText Transfer Protocol and select it.
Click Edit or Advanced, depending on your Windows version.
Select 'open'.
Click Edit.

"Application used to perform this action" should read:

"C:\PROGRAM FILES\INTERNET EXPLORER\iexplore.exe" -nohome
(Check the path to iexplore.exe to make sure that is correct and use the
double quotes.)

DDE should be checked and in the boxes below it you should have:

#1:
"%1",,-1,0,,,,
#2
IExplore
#3 (blank)

#4
WWW_OpenURL

URL:HyperText Transfer Protocol with Privacy should be the same.

Sometimes it is necessary to uncheck Use DDE.



If you get a blank page:


1. Click Start, and then click Run.

2. In the Open box, type:

regsvr32 urlmon.dll

3. Click OK, and then click OK again when you receive the following
message:

DllRegisterServer in urlmon.dll succeeded.


4. If that doesn't fix it, see this article:

http://www.mvps.org/inetexplorer/answers.htm#new_window

5. If you are using WinXP try this:
http://www.mvps.org/sramesh2k/reg/IE...lt_Browser.reg


You can also try this:

Go to Start/run, and type SFC (msconfig for WinXP).
Choose 'Extract One File From Installation Disk' ("Expand File" for
WinXP).
Type oleaut32.dll, not worrying about its location. Then, click Start.

Next to 'Restore From', type in or browse for the file's location, which
is probably in the Win98 (i386 for WinXP) folder of your installation
CD-ROM (typically D:\Win98), or in your Windows\Options\Cabs
(Windows\i386 for WinXP) folder, as the case may be.

Then, next to 'Save File In', enter C:\Windows\System
(C:\Windows\System32 for WinXP), and click OK. System File Checker (or
msconfig) looks for the file, saves it as you requested, and then tells
you that 'the file has been successfully extracted'.

You may need to reboot.
--
Bruce Hagen
MS MVP - Outlook Express
~IB-CA~

"M Weiss" wrote in message
...
All of a sudden, when I click on URLs in the body of an email nothing
happens. please advise.