![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Search this Thread | Display Modes |
#11
|
|||
|
|||
![]()
Thanks for clarifing that. I wasn't aware fax numbers were generally
considered electronic addresses. I'm using the Fax program native in Windows XP. I've done nothing to actually "intergrate" it with Outlook. "Russ Valentine [MVP-Outlook]" wrote in message news ![]() Any Contact with any type of electronic address will appear in the Outlook Address Book. Fax numbers are electronic addresses. Your problem will have one of the cause I have already mentioned. In addition, which fax program you are using and how you integrated with Outlook are in play. You have provided none of this information. -- Russ Valentine [MVP-Outlook] "Jonathan R Williams" wrote in message news:829lh.3932$Xr.2392@trnddc04... This sounds similar to a problem I'm having. I think I understand what Sandra is wanting. You don't necessarily have to have email addresses in your contacts, or at least you didn't used to have to. Suppose you are using your contacts for other purposes, like faxing only? This is what I'm trying to do now. I have several contacts in my contacts folder for sending business faxes, most of them do not have email addresses associated. When I use the Fax wizard, I used to be able to select these names from the "Address book " button on the Send Fax Wizard. I've done this several times in the past. However, now I'm getting similar results as Sandra I have 123 contacts in this address book and only 21 of them are sowing up. And some of those are ARE showing up, do not have and email address associated at all. I'm running Office Profession Edition 2003 SP2 Jonathan "Russ Valentine [MVP-Outlook]" wrote in message ... As I said, use "Save and Close." Do not exit without saving. What you describe is not a known Outlook problem. It appears to be an end user problem. Are you saving these Contacts to the same folder you are displaying? Use Folder List view to see how many Contact folders you have in your profile. -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... When Outlook program is opened, there is a panel (column) on the left side. At the bottom of the panel are the choices Mail, Calendar, Contacts, and Tasks. If I want to check my e-mail, I click on Mail. If I need an address or phone number, I click Contacts. When I click Contacts, all the names and addresses in address card form are presented with an A-Z directory on the right side. If I want to add a new name and address to this component (nothing to do with e-mail), I click New Contact and fill in the window with name, address, phone, etc. I then click the X to close the box and the question, "do you want to save changes", I then click Yes. Until recently, that new information would be instantly added to the Contack component of the Outlook program. I have Outlook 2003. When I do a Search for a name I just tried to add, that new name does appear in a page all alone with the word Contacts at the top, but the name is not in the Contacts component with all my other names and addresses. I hope that helps you. "Russ Valentine [MVP-Outlook]" wrote: Normally one would click "Save and Close" to save a new Contact rather than exiting without saving. When you say the new Contact does not appear in the "Contact portion of my Outlook," what do you mean? -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... Thank you for your patience with me. When I click on Microsoft Outlook, on the left panel there are four choices: mail, contacts, calendar, and tasks. I click on contacts and my list of names and addresses appear. In the top left corner there is an icon for new contacts. When I click that a form window appears where I can input name, address, phone, birthdate, address, etc. After inputing the info I click the close "x" and the question, "do you want to save changes" appears. I click "yes", then the saved information should appear in the Contact portion of my Outlook. It does not. But when I do a Search for a particular name, the data I have just typed shows up in a address card appearing form. But it is not in the whole list in my Contacts. This just started happening a few weeks ago. I have followed the suggestions on the Help menu, but nothing has corrected this problem. Sorry I am so computer ID10T, but you are very kind to try to help me. Sandra "Russ Valentine [MVP-Outlook]" wrote: The Outlook address book has never contained Contacts without email addresses. It's sole purpose is to present a list of electronic addresses that might be needed for sending messages. There is no reason for it to contain other Contacts, and it never has. That's why your post is difficult to understand. Are you sure you are talking about Outlook? If so what version? Any Contact you create that has a valid electronic address in the correct field will appear in the Outlook Address Book view. -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... Until recently when I added a new contact in the Outlook program, it would appear in the address book whether or not there was an e-mail. Maybe I don't know the correct names of Contacts or Address Book, but I know I was able to add names, addresses,etc. and now I can't. Please help. I don't know what a valid resolved electronic address is. Also, I did not add the contact to a folder before, I just saved it and then it appeared in the address list. "Russ Valentine [MVP-Outlook]" wrote: Two things are required: 1. The Contact have a valid resolved electronic address 2. You add the Contact to the same folder you are displaying in the address book view -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... I add a new contact then it does not appear in the contact address book. When I do a search, the information appears separately as a Contact, but is not in the total list of contacts. |
Ads |
#12
|
|||
|
|||
![]()
Windows XP Fax will integrate it's address book automatically with whatever
you have set as your default Contact List manager in Control Panel Internet Options Programs. Clarify the problem you are having and in which address book. -- Russ Valentine [MVP-Outlook] "Jonathan R Williams" wrote in message news:I9zlh.1000$0F1.390@trnddc02... Thanks for clarifing that. I wasn't aware fax numbers were generally considered electronic addresses. I'm using the Fax program native in Windows XP. I've done nothing to actually "intergrate" it with Outlook. "Russ Valentine [MVP-Outlook]" wrote in message news ![]() Any Contact with any type of electronic address will appear in the Outlook Address Book. Fax numbers are electronic addresses. Your problem will have one of the cause I have already mentioned. In addition, which fax program you are using and how you integrated with Outlook are in play. You have provided none of this information. -- Russ Valentine [MVP-Outlook] "Jonathan R Williams" wrote in message news:829lh.3932$Xr.2392@trnddc04... This sounds similar to a problem I'm having. I think I understand what Sandra is wanting. You don't necessarily have to have email addresses in your contacts, or at least you didn't used to have to. Suppose you are using your contacts for other purposes, like faxing only? This is what I'm trying to do now. I have several contacts in my contacts folder for sending business faxes, most of them do not have email addresses associated. When I use the Fax wizard, I used to be able to select these names from the "Address book " button on the Send Fax Wizard. I've done this several times in the past. However, now I'm getting similar results as Sandra I have 123 contacts in this address book and only 21 of them are sowing up. And some of those are ARE showing up, do not have and email address associated at all. I'm running Office Profession Edition 2003 SP2 Jonathan "Russ Valentine [MVP-Outlook]" wrote in message ... As I said, use "Save and Close." Do not exit without saving. What you describe is not a known Outlook problem. It appears to be an end user problem. Are you saving these Contacts to the same folder you are displaying? Use Folder List view to see how many Contact folders you have in your profile. -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... When Outlook program is opened, there is a panel (column) on the left side. At the bottom of the panel are the choices Mail, Calendar, Contacts, and Tasks. If I want to check my e-mail, I click on Mail. If I need an address or phone number, I click Contacts. When I click Contacts, all the names and addresses in address card form are presented with an A-Z directory on the right side. If I want to add a new name and address to this component (nothing to do with e-mail), I click New Contact and fill in the window with name, address, phone, etc. I then click the X to close the box and the question, "do you want to save changes", I then click Yes. Until recently, that new information would be instantly added to the Contack component of the Outlook program. I have Outlook 2003. When I do a Search for a name I just tried to add, that new name does appear in a page all alone with the word Contacts at the top, but the name is not in the Contacts component with all my other names and addresses. I hope that helps you. "Russ Valentine [MVP-Outlook]" wrote: Normally one would click "Save and Close" to save a new Contact rather than exiting without saving. When you say the new Contact does not appear in the "Contact portion of my Outlook," what do you mean? -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... Thank you for your patience with me. When I click on Microsoft Outlook, on the left panel there are four choices: mail, contacts, calendar, and tasks. I click on contacts and my list of names and addresses appear. In the top left corner there is an icon for new contacts. When I click that a form window appears where I can input name, address, phone, birthdate, address, etc. After inputing the info I click the close "x" and the question, "do you want to save changes" appears. I click "yes", then the saved information should appear in the Contact portion of my Outlook. It does not. But when I do a Search for a particular name, the data I have just typed shows up in a address card appearing form. But it is not in the whole list in my Contacts. This just started happening a few weeks ago. I have followed the suggestions on the Help menu, but nothing has corrected this problem. Sorry I am so computer ID10T, but you are very kind to try to help me. Sandra "Russ Valentine [MVP-Outlook]" wrote: The Outlook address book has never contained Contacts without email addresses. It's sole purpose is to present a list of electronic addresses that might be needed for sending messages. There is no reason for it to contain other Contacts, and it never has. That's why your post is difficult to understand. Are you sure you are talking about Outlook? If so what version? Any Contact you create that has a valid electronic address in the correct field will appear in the Outlook Address Book view. -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... Until recently when I added a new contact in the Outlook program, it would appear in the address book whether or not there was an e-mail. Maybe I don't know the correct names of Contacts or Address Book, but I know I was able to add names, addresses,etc. and now I can't. Please help. I don't know what a valid resolved electronic address is. Also, I did not add the contact to a folder before, I just saved it and then it appeared in the address list. "Russ Valentine [MVP-Outlook]" wrote: Two things are required: 1. The Contact have a valid resolved electronic address 2. You add the Contact to the same folder you are displaying in the address book view -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... I add a new contact then it does not appear in the contact address book. When I do a search, the information appears separately as a Contact, but is not in the total list of contacts. |
#13
|
|||
|
|||
![]()
Let's try this again...
Hi. I'm having a similar problem as Sandra described. I'm only able to view a select number of contacts when attempting to send a fax using the Windows Fax program (Start - Accessories - Communications - Fax - Send a Fax). I'm using Microsoft Office Outlook 2003 (11.6359.8107) SP1 to manage my contacts. I have One hundred and Twenty three contacts in my contacts view. I select Address Book from the "Send Fax Wizard" application as described above, and in the field listed "Show Names from the:" I choose "Contacts" which is listed under "Outlook Address Book". The result is a list of only twenty one of the one hundred and twenty three contacts that I have in my Outlook Contacts list. Some of these twenty one entries list the "email type" as "SMTP" while most list is as "FAX" From what I can tell, the other one hundred and two entries have the same fields populated. Also to further clarify. The same twenty one entries appear when trying to compose a new email message and clicking the "To" button (which displays the "Select Names" window). I also cannot type ahead in the "To:" field and have any of the other one hundred and two names resolve to their display names. Microsoft Office Outlook 2003 (11.6359.8107) SP1 Microsoft Windows XP Professional Version 2002 Service Pack 2 Thank you in advance for your kind attention and support! "Russ Valentine [MVP-Outlook]" wrote in message ... Windows XP Fax will integrate it's address book automatically with whatever you have set as your default Contact List manager in Control Panel Internet Options Programs. Clarify the problem you are having and in which address book. -- Russ Valentine [MVP-Outlook] "Jonathan R Williams" wrote in message news:I9zlh.1000$0F1.390@trnddc02... Thanks for clarifing that. I wasn't aware fax numbers were generally considered electronic addresses. I'm using the Fax program native in Windows XP. I've done nothing to actually "intergrate" it with Outlook. "Russ Valentine [MVP-Outlook]" wrote in message news ![]() Any Contact with any type of electronic address will appear in the Outlook Address Book. Fax numbers are electronic addresses. Your problem will have one of the cause I have already mentioned. In addition, which fax program you are using and how you integrated with Outlook are in play. You have provided none of this information. -- Russ Valentine [MVP-Outlook] "Jonathan R Williams" wrote in message news:829lh.3932$Xr.2392@trnddc04... This sounds similar to a problem I'm having. I think I understand what Sandra is wanting. You don't necessarily have to have email addresses in your contacts, or at least you didn't used to have to. Suppose you are using your contacts for other purposes, like faxing only? This is what I'm trying to do now. I have several contacts in my contacts folder for sending business faxes, most of them do not have email addresses associated. When I use the Fax wizard, I used to be able to select these names from the "Address book " button on the Send Fax Wizard. I've done this several times in the past. However, now I'm getting similar results as Sandra I have 123 contacts in this address book and only 21 of them are sowing up. And some of those are ARE showing up, do not have and email address associated at all. I'm running Office Profession Edition 2003 SP2 Jonathan "Russ Valentine [MVP-Outlook]" wrote in message ... As I said, use "Save and Close." Do not exit without saving. What you describe is not a known Outlook problem. It appears to be an end user problem. Are you saving these Contacts to the same folder you are displaying? Use Folder List view to see how many Contact folders you have in your profile. -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... When Outlook program is opened, there is a panel (column) on the left side. At the bottom of the panel are the choices Mail, Calendar, Contacts, and Tasks. If I want to check my e-mail, I click on Mail. If I need an address or phone number, I click Contacts. When I click Contacts, all the names and addresses in address card form are presented with an A-Z directory on the right side. If I want to add a new name and address to this component (nothing to do with e-mail), I click New Contact and fill in the window with name, address, phone, etc. I then click the X to close the box and the question, "do you want to save changes", I then click Yes. Until recently, that new information would be instantly added to the Contack component of the Outlook program. I have Outlook 2003. When I do a Search for a name I just tried to add, that new name does appear in a page all alone with the word Contacts at the top, but the name is not in the Contacts component with all my other names and addresses. I hope that helps you. "Russ Valentine [MVP-Outlook]" wrote: Normally one would click "Save and Close" to save a new Contact rather than exiting without saving. When you say the new Contact does not appear in the "Contact portion of my Outlook," what do you mean? -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... Thank you for your patience with me. When I click on Microsoft Outlook, on the left panel there are four choices: mail, contacts, calendar, and tasks. I click on contacts and my list of names and addresses appear. In the top left corner there is an icon for new contacts. When I click that a form window appears where I can input name, address, phone, birthdate, address, etc. After inputing the info I click the close "x" and the question, "do you want to save changes" appears. I click "yes", then the saved information should appear in the Contact portion of my Outlook. It does not. But when I do a Search for a particular name, the data I have just typed shows up in a address card appearing form. But it is not in the whole list in my Contacts. This just started happening a few weeks ago. I have followed the suggestions on the Help menu, but nothing has corrected this problem. Sorry I am so computer ID10T, but you are very kind to try to help me. Sandra "Russ Valentine [MVP-Outlook]" wrote: The Outlook address book has never contained Contacts without addresses. It's sole purpose is to present a list of electronic addresses that might be needed for sending messages. There is no reason for it to contain other Contacts, and it never has. That's why your post is difficult to understand. Are you sure you are talking about Outlook? If so what version? Any Contact you create that has a valid electronic address in the correct field will appear in the Outlook Address Book view. -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... Until recently when I added a new contact in the Outlook program, it would appear in the address book whether or not there was an e-mail. Maybe I don't know the correct names of Contacts or Address Book, but I know I was able to add names, addresses,etc. and now I can't. Please help. I don't know what a valid resolved electronic address is. Also, I did not add the contact to a folder before, I just saved it and then it appeared in the address list. "Russ Valentine [MVP-Outlook]" wrote: Two things are required: 1. The Contact have a valid resolved electronic address 2. You add the Contact to the same folder you are displaying in the address book view -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... I add a new contact then it does not appear in the contact address book. When I do a search, the information appears separately as a Contact, but is not in the total list of contacts. |
#14
|
|||
|
|||
![]()
Nevermind. I figured it out.
I have to go through all my entries and open and resave the fax number so that the +1 is listed in their number. I presumed this is what you mean as a "qualified electronic address"? If so, that could be clarified a bit for the novice. I am curious though why the entries that did work, didn't need to be "qualified" I don't have a +1 in front of any of their numbers. Thanks again. Susan, Hope this fixes your issue as well if you're trying to fix this. To be clear what I'm doing is opening my contacts up one at a time. Then clicking the button that reads "Business Fax" or "Home Fax" (not the arrow next to the title) then when the "Check Phone Number" window appears I just hit OK and the number updated with the +1 before it. "Jonathan R Williams" wrote in message news:_lNlh.986$kB3.655@trnddc08... Let's try this again... Hi. I'm having a similar problem as Sandra described. I'm only able to view a select number of contacts when attempting to send a fax using the Windows Fax program (Start - Accessories - Communications - Fax - Send a Fax). I'm using Microsoft Office Outlook 2003 (11.6359.8107) SP1 to manage my contacts. I have One hundred and Twenty three contacts in my contacts view. I select Address Book from the "Send Fax Wizard" application as described above, and in the field listed "Show Names from the:" I choose "Contacts" which is listed under "Outlook Address Book". The result is a list of only twenty one of the one hundred and twenty three contacts that I have in my Outlook Contacts list. Some of these twenty one entries list the "email type" as "SMTP" while most list is as "FAX" From what I can tell, the other one hundred and two entries have the same fields populated. Also to further clarify. The same twenty one entries appear when trying to compose a new email message and clicking the "To" button (which displays the "Select Names" window). I also cannot type ahead in the "To:" field and have any of the other one hundred and two names resolve to their display names. Microsoft Office Outlook 2003 (11.6359.8107) SP1 Microsoft Windows XP Professional Version 2002 Service Pack 2 Thank you in advance for your kind attention and support! "Russ Valentine [MVP-Outlook]" wrote in message ... Windows XP Fax will integrate it's address book automatically with whatever you have set as your default Contact List manager in Control Panel Internet Options Programs. Clarify the problem you are having and in which address book. -- Russ Valentine [MVP-Outlook] "Jonathan R Williams" wrote in message news:I9zlh.1000$0F1.390@trnddc02... Thanks for clarifing that. I wasn't aware fax numbers were generally considered electronic addresses. I'm using the Fax program native in Windows XP. I've done nothing to actually "intergrate" it with Outlook. "Russ Valentine [MVP-Outlook]" wrote in message news ![]() Outlook Address Book. Fax numbers are electronic addresses. Your problem will have one of the cause I have already mentioned. In addition, which fax program you are using and how you integrated with Outlook are in play. You have provided none of this information. -- Russ Valentine [MVP-Outlook] "Jonathan R Williams" wrote in message news:829lh.3932$Xr.2392@trnddc04... This sounds similar to a problem I'm having. I think I understand what Sandra is wanting. You don't necessarily have to have email addresses in your contacts, or at least you didn't used to have to. Suppose you are using your contacts for other purposes, like faxing only? This is what I'm trying to do now. I have several contacts in my contacts folder for sending business faxes, most of them do not have email addresses associated. When I use the Fax wizard, I used to be able to select these names from the "Address book " button on the Send Fax Wizard. I've done this several times in the past. However, now I'm getting similar results as Sandra I have 123 contacts in this address book and only 21 of them are sowing up. And some of those are ARE showing up, do not have and email address associated at all. I'm running Office Profession Edition 2003 SP2 Jonathan "Russ Valentine [MVP-Outlook]" wrote in message ... As I said, use "Save and Close." Do not exit without saving. What you describe is not a known Outlook problem. It appears to be an end user problem. Are you saving these Contacts to the same folder you are displaying? Use Folder List view to see how many Contact folders you have in your profile. -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... When Outlook program is opened, there is a panel (column) on the left side. At the bottom of the panel are the choices Mail, Calendar, Contacts, and Tasks. If I want to check my e-mail, I click on Mail. If I need an address or phone number, I click Contacts. When I click Contacts, all the names and addresses in address card form are presented with an A-Z directory on the right side. If I want to add a new name and address to this component (nothing to do with e-mail), I click New Contact and fill in the window with name, address, phone, etc. I then click the X to close the box and the question, "do you want to save changes", I then click Yes. Until recently, that new information would be instantly added to the Contack component of the Outlook program. I have Outlook 2003. When I do a Search for a name I just tried to add, that new name does appear in a page all alone with the word Contacts at the top, but the name is not in the Contacts component with all my other names and addresses. I hope that helps you. "Russ Valentine [MVP-Outlook]" wrote: Normally one would click "Save and Close" to save a new Contact rather than exiting without saving. When you say the new Contact does not appear in the "Contact portion of my Outlook," what do you mean? -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... Thank you for your patience with me. When I click on Microsoft Outlook, on the left panel there are four choices: mail, contacts, calendar, and tasks. I click on contacts and my list of names and addresses appear. In the top left corner there is an icon for new contacts. When I click that a form window appears where I can input name, address, phone, birthdate, address, etc. After inputing the info I click the close "x" and the question, "do you want to save changes" appears. I click "yes", then the saved information should appear in the Contact portion of my Outlook. It does not. But when I do a Search for a particular name, the data I have just typed shows up in a address card appearing form. But it is not in the whole list in my Contacts. This just started happening a few weeks ago. I have followed the suggestions on the Help menu, but nothing has corrected this problem. Sorry I am so computer ID10T, but you are very kind to try to help me. Sandra "Russ Valentine [MVP-Outlook]" wrote: The Outlook address book has never contained Contacts without addresses. It's sole purpose is to present a list of electronic addresses that might be needed for sending messages. There is no reason for it to contain other Contacts, and it never has. That's why your post is difficult to understand. Are you sure you are talking about Outlook? If so what version? Any Contact you create that has a valid electronic address in the correct field will appear in the Outlook Address Book view. -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... Until recently when I added a new contact in the Outlook program, it would appear in the address book whether or not there was an e-mail. Maybe I don't know the correct names of Contacts or Address Book, but I know I was able to add names, addresses,etc. and now I can't. Please help. I don't know what a valid resolved electronic address is. Also, I did not add the contact to a folder before, I just saved it and then it appeared in the address list. "Russ Valentine [MVP-Outlook]" wrote: Two things are required: 1. The Contact have a valid resolved electronic address 2. You add the Contact to the same folder you are displaying in the address book view -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... I add a new contact then it does not appear in the contact address book. When I do a search, the information appears separately as a Contact, but is not in the total list of contacts. |
#15
|
|||
|
|||
![]()
Answers are still the same:
1. Any Contact that does not appear in the Outlook Address Book either does not have a valid resolved electronic address (frequent if you imported any of these Contacts) or resides in a Contact Folder other than the one you are displaying. As a test, you should recreate a Contact that does not appear as you think it should and see if it then appears. 2. Your Outlook Address Book Service is corrupt. Remove it, restart Outlook, re-add it. Autocompletion does not use your Contacts, so that behavior is expected. -- Russ Valentine [MVP-Outlook] "Jonathan R Williams" wrote in message news:_lNlh.986$kB3.655@trnddc08... Let's try this again... Hi. I'm having a similar problem as Sandra described. I'm only able to view a select number of contacts when attempting to send a fax using the Windows Fax program (Start - Accessories - Communications - Fax - Send a Fax). I'm using Microsoft Office Outlook 2003 (11.6359.8107) SP1 to manage my contacts. I have One hundred and Twenty three contacts in my contacts view. I select Address Book from the "Send Fax Wizard" application as described above, and in the field listed "Show Names from the:" I choose "Contacts" which is listed under "Outlook Address Book". The result is a list of only twenty one of the one hundred and twenty three contacts that I have in my Outlook Contacts list. Some of these twenty one entries list the "email type" as "SMTP" while most list is as "FAX" From what I can tell, the other one hundred and two entries have the same fields populated. Also to further clarify. The same twenty one entries appear when trying to compose a new email message and clicking the "To" button (which displays the "Select Names" window). I also cannot type ahead in the "To:" field and have any of the other one hundred and two names resolve to their display names. Microsoft Office Outlook 2003 (11.6359.8107) SP1 Microsoft Windows XP Professional Version 2002 Service Pack 2 Thank you in advance for your kind attention and support! "Russ Valentine [MVP-Outlook]" wrote in message ... Windows XP Fax will integrate it's address book automatically with whatever you have set as your default Contact List manager in Control Panel Internet Options Programs. Clarify the problem you are having and in which address book. -- Russ Valentine [MVP-Outlook] "Jonathan R Williams" wrote in message news:I9zlh.1000$0F1.390@trnddc02... Thanks for clarifing that. I wasn't aware fax numbers were generally considered electronic addresses. I'm using the Fax program native in Windows XP. I've done nothing to actually "intergrate" it with Outlook. "Russ Valentine [MVP-Outlook]" wrote in message news ![]() Outlook Address Book. Fax numbers are electronic addresses. Your problem will have one of the cause I have already mentioned. In addition, which fax program you are using and how you integrated with Outlook are in play. You have provided none of this information. -- Russ Valentine [MVP-Outlook] "Jonathan R Williams" wrote in message news:829lh.3932$Xr.2392@trnddc04... This sounds similar to a problem I'm having. I think I understand what Sandra is wanting. You don't necessarily have to have email addresses in your contacts, or at least you didn't used to have to. Suppose you are using your contacts for other purposes, like faxing only? This is what I'm trying to do now. I have several contacts in my contacts folder for sending business faxes, most of them do not have email addresses associated. When I use the Fax wizard, I used to be able to select these names from the "Address book " button on the Send Fax Wizard. I've done this several times in the past. However, now I'm getting similar results as Sandra I have 123 contacts in this address book and only 21 of them are sowing up. And some of those are ARE showing up, do not have and email address associated at all. I'm running Office Profession Edition 2003 SP2 Jonathan "Russ Valentine [MVP-Outlook]" wrote in message ... As I said, use "Save and Close." Do not exit without saving. What you describe is not a known Outlook problem. It appears to be an end user problem. Are you saving these Contacts to the same folder you are displaying? Use Folder List view to see how many Contact folders you have in your profile. -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... When Outlook program is opened, there is a panel (column) on the left side. At the bottom of the panel are the choices Mail, Calendar, Contacts, and Tasks. If I want to check my e-mail, I click on Mail. If I need an address or phone number, I click Contacts. When I click Contacts, all the names and addresses in address card form are presented with an A-Z directory on the right side. If I want to add a new name and address to this component (nothing to do with e-mail), I click New Contact and fill in the window with name, address, phone, etc. I then click the X to close the box and the question, "do you want to save changes", I then click Yes. Until recently, that new information would be instantly added to the Contack component of the Outlook program. I have Outlook 2003. When I do a Search for a name I just tried to add, that new name does appear in a page all alone with the word Contacts at the top, but the name is not in the Contacts component with all my other names and addresses. I hope that helps you. "Russ Valentine [MVP-Outlook]" wrote: Normally one would click "Save and Close" to save a new Contact rather than exiting without saving. When you say the new Contact does not appear in the "Contact portion of my Outlook," what do you mean? -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... Thank you for your patience with me. When I click on Microsoft Outlook, on the left panel there are four choices: mail, contacts, calendar, and tasks. I click on contacts and my list of names and addresses appear. In the top left corner there is an icon for new contacts. When I click that a form window appears where I can input name, address, phone, birthdate, address, etc. After inputing the info I click the close "x" and the question, "do you want to save changes" appears. I click "yes", then the saved information should appear in the Contact portion of my Outlook. It does not. But when I do a Search for a particular name, the data I have just typed shows up in a address card appearing form. But it is not in the whole list in my Contacts. This just started happening a few weeks ago. I have followed the suggestions on the Help menu, but nothing has corrected this problem. Sorry I am so computer ID10T, but you are very kind to try to help me. Sandra "Russ Valentine [MVP-Outlook]" wrote: The Outlook address book has never contained Contacts without addresses. It's sole purpose is to present a list of electronic addresses that might be needed for sending messages. There is no reason for it to contain other Contacts, and it never has. That's why your post is difficult to understand. Are you sure you are talking about Outlook? If so what version? Any Contact you create that has a valid electronic address in the correct field will appear in the Outlook Address Book view. -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... Until recently when I added a new contact in the Outlook program, it would appear in the address book whether or not there was an e-mail. Maybe I don't know the correct names of Contacts or Address Book, but I know I was able to add names, addresses,etc. and now I can't. Please help. I don't know what a valid resolved electronic address is. Also, I did not add the contact to a folder before, I just saved it and then it appeared in the address list. "Russ Valentine [MVP-Outlook]" wrote: Two things are required: 1. The Contact have a valid resolved electronic address 2. You add the Contact to the same folder you are displaying in the address book view -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... I add a new contact then it does not appear in the contact address book. When I do a search, the information appears separately as a Contact, but is not in the total list of contacts. |
#16
|
|||
|
|||
![]()
Adding +1 is not necessary. I gave you the answer is in my other post.
However you created these contacts, you did not resolve the addresses. Usually that happens when you import Contacts. All that is required to resolve the address is to Open and Save the Contact Record. -- Russ Valentine [MVP-Outlook] "Jonathan R Williams" wrote in message news:a0Olh.762$PN2.75@trnddc07... Nevermind. I figured it out. I have to go through all my entries and open and resave the fax number so that the +1 is listed in their number. I presumed this is what you mean as a "qualified electronic address"? If so, that could be clarified a bit for the novice. I am curious though why the entries that did work, didn't need to be "qualified" I don't have a +1 in front of any of their numbers. Thanks again. Susan, Hope this fixes your issue as well if you're trying to fix this. To be clear what I'm doing is opening my contacts up one at a time. Then clicking the button that reads "Business Fax" or "Home Fax" (not the arrow next to the title) then when the "Check Phone Number" window appears I just hit OK and the number updated with the +1 before it. "Jonathan R Williams" wrote in message news:_lNlh.986$kB3.655@trnddc08... Let's try this again... Hi. I'm having a similar problem as Sandra described. I'm only able to view a select number of contacts when attempting to send a fax using the Windows Fax program (Start - Accessories - Communications - Fax - Send a Fax). I'm using Microsoft Office Outlook 2003 (11.6359.8107) SP1 to manage my contacts. I have One hundred and Twenty three contacts in my contacts view. I select Address Book from the "Send Fax Wizard" application as described above, and in the field listed "Show Names from the:" I choose "Contacts" which is listed under "Outlook Address Book". The result is a list of only twenty one of the one hundred and twenty three contacts that I have in my Outlook Contacts list. Some of these twenty one entries list the "email type" as "SMTP" while most list is as "FAX" From what I can tell, the other one hundred and two entries have the same fields populated. Also to further clarify. The same twenty one entries appear when trying to compose a new email message and clicking the "To" button (which displays the "Select Names" window). I also cannot type ahead in the "To:" field and have any of the other one hundred and two names resolve to their display names. Microsoft Office Outlook 2003 (11.6359.8107) SP1 Microsoft Windows XP Professional Version 2002 Service Pack 2 Thank you in advance for your kind attention and support! "Russ Valentine [MVP-Outlook]" wrote in message ... Windows XP Fax will integrate it's address book automatically with whatever you have set as your default Contact List manager in Control Panel Internet Options Programs. Clarify the problem you are having and in which address book. -- Russ Valentine [MVP-Outlook] "Jonathan R Williams" wrote in message news:I9zlh.1000$0F1.390@trnddc02... Thanks for clarifing that. I wasn't aware fax numbers were generally considered electronic addresses. I'm using the Fax program native in Windows XP. I've done nothing to actually "intergrate" it with Outlook. "Russ Valentine [MVP-Outlook]" wrote in message news ![]() Outlook Address Book. Fax numbers are electronic addresses. Your problem will have one of the cause I have already mentioned. In addition, which fax program you are using and how you integrated with Outlook are in play. You have provided none of this information. -- Russ Valentine [MVP-Outlook] "Jonathan R Williams" wrote in message news:829lh.3932$Xr.2392@trnddc04... This sounds similar to a problem I'm having. I think I understand what Sandra is wanting. You don't necessarily have to have email addresses in your contacts, or at least you didn't used to have to. Suppose you are using your contacts for other purposes, like faxing only? This is what I'm trying to do now. I have several contacts in my contacts folder for sending business faxes, most of them do not have email addresses associated. When I use the Fax wizard, I used to be able to select these names from the "Address book " button on the Send Fax Wizard. I've done this several times in the past. However, now I'm getting similar results as Sandra I have 123 contacts in this address book and only 21 of them are sowing up. And some of those are ARE showing up, do not have and email address associated at all. I'm running Office Profession Edition 2003 SP2 Jonathan "Russ Valentine [MVP-Outlook]" wrote in message ... As I said, use "Save and Close." Do not exit without saving. What you describe is not a known Outlook problem. It appears to be an end user problem. Are you saving these Contacts to the same folder you are displaying? Use Folder List view to see how many Contact folders you have in your profile. -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... When Outlook program is opened, there is a panel (column) on the left side. At the bottom of the panel are the choices Mail, Calendar, Contacts, and Tasks. If I want to check my e-mail, I click on Mail. If I need an address or phone number, I click Contacts. When I click Contacts, all the names and addresses in address card form are presented with an A-Z directory on the right side. If I want to add a new name and address to this component (nothing to do with e-mail), I click New Contact and fill in the window with name, address, phone, etc. I then click the X to close the box and the question, "do you want to save changes", I then click Yes. Until recently, that new information would be instantly added to the Contack component of the Outlook program. I have Outlook 2003. When I do a Search for a name I just tried to add, that new name does appear in a page all alone with the word Contacts at the top, but the name is not in the Contacts component with all my other names and addresses. I hope that helps you. "Russ Valentine [MVP-Outlook]" wrote: Normally one would click "Save and Close" to save a new Contact rather than exiting without saving. When you say the new Contact does not appear in the "Contact portion of my Outlook," what do you mean? -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... Thank you for your patience with me. When I click on Microsoft Outlook, on the left panel there are four choices: mail, contacts, calendar, and tasks. I click on contacts and my list of names and addresses appear. In the top left corner there is an icon for new contacts. When I click that a form window appears where I can input name, address, phone, birthdate, address, etc. After inputing the info I click the close "x" and the question, "do you want to save changes" appears. I click "yes", then the saved information should appear in the Contact portion of my Outlook. It does not. But when I do a Search for a particular name, the data I have just typed shows up in a address card appearing form. But it is not in the whole list in my Contacts. This just started happening a few weeks ago. I have followed the suggestions on the Help menu, but nothing has corrected this problem. Sorry I am so computer ID10T, but you are very kind to try to help me. Sandra "Russ Valentine [MVP-Outlook]" wrote: The Outlook address book has never contained Contacts without addresses. It's sole purpose is to present a list of electronic addresses that might be needed for sending messages. There is no reason for it to contain other Contacts, and it never has. That's why your post is difficult to understand. Are you sure you are talking about Outlook? If so what version? Any Contact you create that has a valid electronic address in the correct field will appear in the Outlook Address Book view. -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... Until recently when I added a new contact in the Outlook program, it would appear in the address book whether or not there was an e-mail. Maybe I don't know the correct names of Contacts or Address Book, but I know I was able to add names, addresses,etc. and now I can't. Please help. I don't know what a valid resolved electronic address is. Also, I did not add the contact to a folder before, I just saved it and then it appeared in the address list. "Russ Valentine [MVP-Outlook]" wrote: Two things are required: 1. The Contact have a valid resolved electronic address 2. You add the Contact to the same folder you are displaying in the address book view -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... I add a new contact then it does not appear in the contact address book. When I do a search, the information appears separately as a Contact, but is not in the total list of contacts. |
#17
|
|||
|
|||
![]()
I didn't add the +1. Simply opening each contact and saving them
automatically put the +1 in. Yes these contact are imported. They were copied from a different PC. I don't see where it was mentioned previously that we should open and save each entry. Again, thanks for you assistance. Happy New Year "Russ Valentine [MVP-Outlook]" wrote in message ... Adding +1 is not necessary. I gave you the answer is in my other post. However you created these contacts, you did not resolve the addresses. Usually that happens when you import Contacts. All that is required to resolve the address is to Open and Save the Contact Record. -- Russ Valentine [MVP-Outlook] "Jonathan R Williams" wrote in message news:a0Olh.762$PN2.75@trnddc07... Nevermind. I figured it out. I have to go through all my entries and open and resave the fax number so that the +1 is listed in their number. I presumed this is what you mean as a "qualified electronic address"? If so, that could be clarified a bit for the novice. I am curious though why the entries that did work, didn't need to be "qualified" I don't have a +1 in front of any of their numbers. Thanks again. Susan, Hope this fixes your issue as well if you're trying to fix this. To be clear what I'm doing is opening my contacts up one at a time. Then clicking the button that reads "Business Fax" or "Home Fax" (not the arrow next to the title) then when the "Check Phone Number" window appears I just hit OK and the number updated with the +1 before it. "Jonathan R Williams" wrote in message news:_lNlh.986$kB3.655@trnddc08... Let's try this again... Hi. I'm having a similar problem as Sandra described. I'm only able to view a select number of contacts when attempting to send a fax using the Windows Fax program (Start - Accessories - Communications - Fax - Send a Fax). I'm using Microsoft Office Outlook 2003 (11.6359.8107) SP1 to manage my contacts. I have One hundred and Twenty three contacts in my contacts view. I select Address Book from the "Send Fax Wizard" application as described above, and in the field listed "Show Names from the:" I choose "Contacts" which is listed under "Outlook Address Book". The result is a list of only twenty one of the one hundred and twenty three contacts that I have in my Outlook Contacts list. Some of these twenty one entries list the "email type" as "SMTP" while most list is as "FAX" From what I can tell, the other one hundred and two entries have the same fields populated. Also to further clarify. The same twenty one entries appear when trying to compose a new email message and clicking the "To" button (which displays the "Select Names" window). I also cannot type ahead in the "To:" field and have any of the other one hundred and two names resolve to their display names. Microsoft Office Outlook 2003 (11.6359.8107) SP1 Microsoft Windows XP Professional Version 2002 Service Pack 2 Thank you in advance for your kind attention and support! "Russ Valentine [MVP-Outlook]" wrote in message ... Windows XP Fax will integrate it's address book automatically with whatever you have set as your default Contact List manager in Control Panel Internet Options Programs. Clarify the problem you are having and in which address book. -- Russ Valentine [MVP-Outlook] "Jonathan R Williams" wrote in message news:I9zlh.1000$0F1.390@trnddc02... Thanks for clarifing that. I wasn't aware fax numbers were generally considered electronic addresses. I'm using the Fax program native in Windows XP. I've done nothing to actually "intergrate" it with Outlook. "Russ Valentine [MVP-Outlook]" wrote in message news ![]() Outlook Address Book. Fax numbers are electronic addresses. Your problem will have one of the cause I have already mentioned. In addition, which fax program you are using and how you integrated with Outlook are in play. You have provided none of this information. -- Russ Valentine [MVP-Outlook] "Jonathan R Williams" wrote in message news:829lh.3932$Xr.2392@trnddc04... This sounds similar to a problem I'm having. I think I understand what Sandra is wanting. You don't necessarily have to have email addresses in your contacts, or at least you didn't used to have to. Suppose you are using your contacts for other purposes, like faxing only? This is what I'm trying to do now. I have several contacts in my contacts folder for sending business faxes, most of them do not have email addresses associated. When I use the Fax wizard, I used to be able to select these names from the "Address book " button on the Send Fax Wizard. I've done this several times in the past. However, now I'm getting similar results as Sandra I have 123 contacts in this address book and only 21 of them are sowing up. And some of those are ARE showing up, do not have and email address associated at all. I'm running Office Profession Edition 2003 SP2 Jonathan "Russ Valentine [MVP-Outlook]" wrote in message ... As I said, use "Save and Close." Do not exit without saving. What you describe is not a known Outlook problem. It appears to be an end user problem. Are you saving these Contacts to the same folder you are displaying? Use Folder List view to see how many Contact folders you have in your profile. -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... When Outlook program is opened, there is a panel (column) on the left side. At the bottom of the panel are the choices Mail, Calendar, Contacts, and Tasks. If I want to check my e-mail, I click on Mail. If I need an address or phone number, I click Contacts. When I click Contacts, all the names and addresses in address card form are presented with an A-Z directory on the right side. If I want to add a new name and address to this component (nothing to do with e-mail), I click New Contact and fill in the window with name, address, phone, etc. I then click the X to close the box and the question, "do you want to save changes", I then click Yes. Until recently, that new information would be instantly added to the Contack component of the Outlook program. I have Outlook 2003. When I do a Search for a name I just tried to add, that new name does appear in a page all alone with the word Contacts at the top, but the name is not in the Contacts component with all my other names and addresses. I hope that helps you. "Russ Valentine [MVP-Outlook]" wrote: Normally one would click "Save and Close" to save a new Contact rather than exiting without saving. When you say the new Contact does not appear in the "Contact portion of my Outlook," what do you mean? -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... Thank you for your patience with me. When I click on Microsoft Outlook, on the left panel there are four choices: mail, contacts, calendar, and tasks. I click on contacts and my list of names and addresses appear. In the top left corner there is an icon for new contacts. When I click that a form window appears where I can input name, address, phone, birthdate, address, etc. After inputing the info I click the close "x" and the question, "do you want to save changes" appears. I click "yes", then the saved information should appear in the Contact portion of my Outlook. It does not. But when I do a Search for a particular name, the data I have just typed shows up in a address card appearing form. But it is not in the whole list in my Contacts. This just started happening a few weeks ago. I have followed the suggestions on the Help menu, but nothing has corrected this problem. Sorry I am so computer ID10T, but you are very kind to try to help me. Sandra "Russ Valentine [MVP-Outlook]" wrote: The Outlook address book has never contained Contacts without addresses. It's sole purpose is to present a list of electronic addresses that might be needed for sending messages. There is no reason for it to contain other Contacts, and it never has. That's why your post is difficult to understand. Are you sure you are talking about Outlook? If so what version? Any Contact you create that has a valid electronic address in the correct field will appear in the Outlook Address Book view. -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... Until recently when I added a new contact in the Outlook program, it would appear in the address book whether or not there was an e-mail. Maybe I don't know the correct names of Contacts or Address Book, but I know I was able to add names, addresses,etc. and now I can't. Please help. I don't know what a valid resolved electronic address is. Also, I did not add the contact to a folder before, I just saved it and then it appeared in the address list. "Russ Valentine [MVP-Outlook]" wrote: Two things are required: 1. The Contact have a valid resolved electronic address 2. You add the Contact to the same folder you are displaying in the address book view -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... I add a new contact then it does not appear in the contact address book. When I do a search, the information appears separately as a Contact, but is not in the total list of contacts. |
#18
|
|||
|
|||
![]()
That's because I had assumed you had already created Contacts with valid,
resolved addresses. Remember, I asked you to check that? That's why I then suggested you create a new Contact from scratch to see if we could troubleshoot exactly where the problem was occurring. Once you said that opening and saving a Contact made it appear, I was able to deduce you had not yet created valid Contacts, and the most common reason that occurs is by importing your Contacts. I didn't want other readers to think that the country code is needed to make fax numbers valid. It isn't. Unfortunately, importing data into Outlook is fraught with difficulties. It's best to avoid it if you can. Only import if you must convert from a foreign file format, and if you do you'll need to go through and resolve electronic addresses yourself. -- Russ Valentine [MVP-Outlook] "Jonathan R Williams" wrote in message news:5SRnh.632$%Q4.364@trnddc06... I didn't add the +1. Simply opening each contact and saving them automatically put the +1 in. Yes these contact are imported. They were copied from a different PC. I don't see where it was mentioned previously that we should open and save each entry. Again, thanks for you assistance. Happy New Year "Russ Valentine [MVP-Outlook]" wrote in message ... Adding +1 is not necessary. I gave you the answer is in my other post. However you created these contacts, you did not resolve the addresses. Usually that happens when you import Contacts. All that is required to resolve the address is to Open and Save the Contact Record. -- Russ Valentine [MVP-Outlook] "Jonathan R Williams" wrote in message news:a0Olh.762$PN2.75@trnddc07... Nevermind. I figured it out. I have to go through all my entries and open and resave the fax number so that the +1 is listed in their number. I presumed this is what you mean as a "qualified electronic address"? If so, that could be clarified a bit for the novice. I am curious though why the entries that did work, didn't need to be "qualified" I don't have a +1 in front of any of their numbers. Thanks again. Susan, Hope this fixes your issue as well if you're trying to fix this. To be clear what I'm doing is opening my contacts up one at a time. Then clicking the button that reads "Business Fax" or "Home Fax" (not the arrow next to the title) then when the "Check Phone Number" window appears I just hit OK and the number updated with the +1 before it. "Jonathan R Williams" wrote in message news:_lNlh.986$kB3.655@trnddc08... Let's try this again... Hi. I'm having a similar problem as Sandra described. I'm only able to view a select number of contacts when attempting to send a fax using the Windows Fax program (Start - Accessories - Communications - Fax - Send a Fax). I'm using Microsoft Office Outlook 2003 (11.6359.8107) SP1 to manage my contacts. I have One hundred and Twenty three contacts in my contacts view. I select Address Book from the "Send Fax Wizard" application as described above, and in the field listed "Show Names from the:" I choose "Contacts" which is listed under "Outlook Address Book". The result is a list of only twenty one of the one hundred and twenty three contacts that I have in my Outlook Contacts list. Some of these twenty one entries list the "email type" as "SMTP" while most list is as "FAX" From what I can tell, the other one hundred and two entries have the same fields populated. Also to further clarify. The same twenty one entries appear when trying to compose a new email message and clicking the "To" button (which displays the "Select Names" window). I also cannot type ahead in the "To:" field and have any of the other one hundred and two names resolve to their display names. Microsoft Office Outlook 2003 (11.6359.8107) SP1 Microsoft Windows XP Professional Version 2002 Service Pack 2 Thank you in advance for your kind attention and support! "Russ Valentine [MVP-Outlook]" wrote in message ... Windows XP Fax will integrate it's address book automatically with whatever you have set as your default Contact List manager in Control Panel Internet Options Programs. Clarify the problem you are having and in which address book. -- Russ Valentine [MVP-Outlook] "Jonathan R Williams" wrote in message news:I9zlh.1000$0F1.390@trnddc02... Thanks for clarifing that. I wasn't aware fax numbers were generally considered electronic addresses. I'm using the Fax program native in Windows XP. I've done nothing to actually "intergrate" it with Outlook. "Russ Valentine [MVP-Outlook]" wrote in message news ![]() Outlook Address Book. Fax numbers are electronic addresses. Your problem will have one of the cause I have already mentioned. In addition, which fax program you are using and how you integrated with Outlook are in play. You have provided none of this information. -- Russ Valentine [MVP-Outlook] "Jonathan R Williams" wrote in message news:829lh.3932$Xr.2392@trnddc04... This sounds similar to a problem I'm having. I think I understand what Sandra is wanting. You don't necessarily have to have email addresses in your contacts, or at least you didn't used to have to. Suppose you are using your contacts for other purposes, like faxing only? This is what I'm trying to do now. I have several contacts in my contacts folder for sending business faxes, most of them do not have email addresses associated. When I use the Fax wizard, I used to be able to select these names from the "Address book " button on the Send Fax Wizard. I've done this several times in the past. However, now I'm getting similar results as Sandra I have 123 contacts in this address book and only 21 of them are sowing up. And some of those are ARE showing up, do not have and email address associated at all. I'm running Office Profession Edition 2003 SP2 Jonathan "Russ Valentine [MVP-Outlook]" wrote in message ... As I said, use "Save and Close." Do not exit without saving. What you describe is not a known Outlook problem. It appears to be an end user problem. Are you saving these Contacts to the same folder you are displaying? Use Folder List view to see how many Contact folders you have in your profile. -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... When Outlook program is opened, there is a panel (column) on the left side. At the bottom of the panel are the choices Mail, Calendar, Contacts, and Tasks. If I want to check my e-mail, I click on Mail. If I need an address or phone number, I click Contacts. When I click Contacts, all the names and addresses in address card form are presented with an A-Z directory on the right side. If I want to add a new name and address to this component (nothing to do with e-mail), I click New Contact and fill in the window with name, address, phone, etc. I then click the X to close the box and the question, "do you want to save changes", I then click Yes. Until recently, that new information would be instantly added to the Contack component of the Outlook program. I have Outlook 2003. When I do a Search for a name I just tried to add, that new name does appear in a page all alone with the word Contacts at the top, but the name is not in the Contacts component with all my other names and addresses. I hope that helps you. "Russ Valentine [MVP-Outlook]" wrote: Normally one would click "Save and Close" to save a new Contact rather than exiting without saving. When you say the new Contact does not appear in the "Contact portion of my Outlook," what do you mean? -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... Thank you for your patience with me. When I click on Microsoft Outlook, on the left panel there are four choices: mail, contacts, calendar, and tasks. I click on contacts and my list of names and addresses appear. In the top left corner there is an icon for new contacts. When I click that a form window appears where I can input name, address, phone, birthdate, address, etc. After inputing the info I click the close "x" and the question, "do you want to save changes" appears. I click "yes", then the saved information should appear in the Contact portion of my Outlook. It does not. But when I do a Search for a particular name, the data I have just typed shows up in a address card appearing form. But it is not in the whole list in my Contacts. This just started happening a few weeks ago. I have followed the suggestions on the Help menu, but nothing has corrected this problem. Sorry I am so computer ID10T, but you are very kind to try to help me. Sandra "Russ Valentine [MVP-Outlook]" wrote: The Outlook address book has never contained Contacts without addresses. It's sole purpose is to present a list of electronic addresses that might be needed for sending messages. There is no reason for it to contain other Contacts, and it never has. That's why your post is difficult to understand. Are you sure you are talking about Outlook? If so what version? Any Contact you create that has a valid electronic address in the correct field will appear in the Outlook Address Book view. -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... Until recently when I added a new contact in the Outlook program, it would appear in the address book whether or not there was an e-mail. Maybe I don't know the correct names of Contacts or Address Book, but I know I was able to add names, addresses,etc. and now I can't. Please help. I don't know what a valid resolved electronic address is. Also, I did not add the contact to a folder before, I just saved it and then it appeared in the address list. "Russ Valentine [MVP-Outlook]" wrote: Two things are required: 1. The Contact have a valid resolved electronic address 2. You add the Contact to the same folder you are displaying in the address book view -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... I add a new contact then it does not appear in the contact address book. When I do a search, the information appears separately as a Contact, but is not in the total list of contacts. |
#19
|
|||
|
|||
![]()
Ante numerosas opciones de ortografia
-----Mensaje original----- De: Jonathan R Williams ] Expuesto a las: Sábado, 06 de Enero de 2007 15:27 Expuesto en: microsoft.public.outlook.contacts Conversación: contacts not appearing in contact list Asunto: contacts not appearing in contact list I didn't add the +1. Simply opening each contact and saving them automatically put the +1 in. Yes these contact are imported. They were copied from a different PC. I don't see where it was mentioned previously that we should open and save each entry. Again, thanks for you assistance. Happy New Year "Russ Valentine [MVP-Outlook]" wrote in message ... Adding +1 is not necessary. I gave you the answer is in my other post. However you created these contacts, you did not resolve the addresses. Usually that happens when you import Contacts. All that is required to resolve the address is to Open and Save the Contact Record. -- Russ Valentine [MVP-Outlook] "Jonathan R Williams" wrote in message news:a0Olh.762$PN2.75@trnddc07... Nevermind. I figured it out. I have to go through all my entries and open and resave the fax number so that the +1 is listed in their number. I presumed this is what you mean as a "qualified electronic address"? If so, that could be clarified a bit for the novice. I am curious though why the entries that did work, didn't need to be "qualified" I don't have a +1 in front of any of their numbers. Thanks again. Susan, Hope this fixes your issue as well if you're trying to fix this. To be clear what I'm doing is opening my contacts up one at a time. Then clicking the button that reads "Business Fax" or "Home Fax" (not the arrow next to the title) then when the "Check Phone Number" window appears I just hit OK and the number updated with the +1 before it. "Jonathan R Williams" wrote in message news:_lNlh.986$kB3.655@trnddc08... Let's try this again... Hi. I'm having a similar problem as Sandra described. I'm only able to view a select number of contacts when attempting to send a fax using the Windows Fax program (Start - Accessories - Communications - Fax - Send a Fax). I'm using Microsoft Office Outlook 2003 (11.6359.8107) SP1 to manage my contacts. I have One hundred and Twenty three contacts in my contacts view. I select Address Book from the "Send Fax Wizard" application as described above, and in the field listed "Show Names from the:" I choose "Contacts" which is listed under "Outlook Address Book". The result is a list of only twenty one of the one hundred and twenty three contacts that I have in my Outlook Contacts list. Some of these twenty one entries list the "email type" as "SMTP" while most list is as "FAX" From what I can tell, the other one hundred and two entries have the same fields populated. Also to further clarify. The same twenty one entries appear when trying to compose a new email message and clicking the "To" button (which displays the "Select Names" window). I also cannot type ahead in the "To:" field and have any of the other one hundred and two names resolve to their display names. Microsoft Office Outlook 2003 (11.6359.8107) SP1 Microsoft Windows XP Professional Version 2002 Service Pack 2 Thank you in advance for your kind attention and support! "Russ Valentine [MVP-Outlook]" wrote in message ... Windows XP Fax will integrate it's address book automatically with whatever you have set as your default Contact List manager in Control Panel Internet Options Programs. Clarify the problem you are having and in which address book. -- Russ Valentine [MVP-Outlook] "Jonathan R Williams" wrote in message news:I9zlh.1000$0F1.390@trnddc02... Thanks for clarifing that. I wasn't aware fax numbers were generally considered electronic addresses. I'm using the Fax program native in Windows XP. I've done nothing to actually "intergrate" it with Outlook. "Russ Valentine [MVP-Outlook]" wrote in message news ![]() the Outlook Address Book. Fax numbers are electronic addresses. Your problem will have one of the cause I have already mentioned. In addition, which fax program you are using and how you integrated with Outlook are in play. You have provided none of this information. -- Russ Valentine [MVP-Outlook] "Jonathan R Williams" wrote in message news:829lh.3932$Xr.2392@trnddc04... This sounds similar to a problem I'm having. I think I understand what Sandra is wanting. You don't necessarily have to have email addresses in your contacts, or at least you didn't used to have to. Suppose you are using your contacts for other purposes, like faxing only? This is what I'm trying to do now. I have several contacts in my contacts folder for sending business faxes, most of them do not have email addresses associated. When I use the Fax wizard, I used to be able to select these names from the "Address book " button on the Send Fax Wizard. I've done this several times in the past. However, now I'm getting similar results as Sandra I have 123 contacts in this address book and only 21 of them are sowing up. And some of those are ARE showing up, do not have and email address associated at all. I'm running Office Profession Edition 2003 SP2 Jonathan "Russ Valentine [MVP-Outlook]" wrote in message ... As I said, use "Save and Close." Do not exit without saving. What you describe is not a known Outlook problem. It appears to be an end user problem. Are you saving these Contacts to the same folder you are displaying? Use Folder List view to see how many Contact folders you have in your profile. -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... When Outlook program is opened, there is a panel (column) on the left side. At the bottom of the panel are the choices Mail, Calendar, Contacts, and Tasks. If I want to check my e-mail, I click on Mail. If I need an address or phone number, I click Contacts. When I click Contacts, all the names and addresses in address card form are presented with an A-Z directory on the right side. If I want to add a new name and address to this component (nothing to do with e-mail), I click New Contact and fill in the window with name, address, phone, etc. I then click the X to close the box and the question, "do you want to save changes", I then click Yes. Until recently, that new information would be instantly added to the Contack component of the Outlook program. I have Outlook 2003. When I do a Search for a name I just tried to add, that new name does appear in a page all alone with the word Contacts at the top, but the name is not in the Contacts component with all my other names and addresses. I hope that helps you. "Russ Valentine [MVP-Outlook]" wrote: Normally one would click "Save and Close" to save a new Contact rather than exiting without saving. When you say the new Contact does not appear in the "Contact portion of my Outlook," what do you mean? -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... Thank you for your patience with me. When I click on Microsoft Outlook, on the left panel there are four choices: mail, contacts, calendar, and tasks. I click on contacts and my list of names and addresses appear. In the top left corner there is an icon for new contacts. When I click that a form window appears where I can input name, address, phone, birthdate, address, etc. After inputing the info I click the close "x" and the question, "do you want to save changes" appears. I click "yes", then the saved information should appear in the Contact portion of my Outlook. It does not. But when I do a Search for a particular name, the data I have just typed shows up in a address card appearing form. But it is not in the whole list in my Contacts. This just started happening a few weeks ago. I have followed the suggestions on the Help menu, but nothing has corrected this problem. Sorry I am so computer ID10T, but you are very kind to try to help me. Sandra "Russ Valentine [MVP-Outlook]" wrote: The Outlook address book has never contained Contacts without email addresses. It's sole purpose is to present a list of electronic addresses that might be needed for sending messages. There is no reason for it to contain other Contacts, and it never has. That's why your post is difficult to understand. Are you sure you are talking about Outlook? If so what version? Any Contact you create that has a valid electronic address in the correct field will appear in the Outlook Address Book view. -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... Until recently when I added a new contact in the Outlook program, it would appear in the address book whether or not there was an e-mail. Maybe I don't know the correct names of Contacts or Address Book, but I know I was able to add names, addresses,etc. and now I can't. Please help. I don't know what a valid resolved electronic address is. Also, I did not add the contact to a folder before, I just saved it and then it appeared in the address list. "Russ Valentine [MVP-Outlook]" wrote: Two things are required: 1. The Contact have a valid resolved electronic address 2. You add the Contact to the same folder you are displaying in the address book view -- Russ Valentine [MVP-Outlook] "Sandra Lou Thorne" wrote in message ... I add a new contact then it does not appear in the contact address book. When I do a search, the information appears separately as a Contact, but is not in the total list of contacts. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Semi Colons appearing at the end of contact information | Ches | Outlook - Using Contacts | 0 | August 23rd 06 03:53 PM |
Contact not appearing in Global Address List | Andy Wolsten | Outlook - Using Contacts | 1 | April 28th 06 07:54 AM |
How to delete contact that keeps appearing but not in addr book? | FAHA | Outlook - Using Contacts | 1 | April 6th 06 08:51 PM |
Some contact folders in Folders List not appearing in Contacts | ee | Outlook - Using Contacts | 3 | March 20th 06 08:58 PM |
Contacts appearing in assistants contact folder | [email protected] | Outlook - Using Contacts | 3 | March 10th 06 03:16 PM |