Setting a Category
 

Hi,

I'm having trouble adding to my code to set a Category by clicking a
Checkbox. I'm getting an error on line 8. I think something is wrong with
the If-Then clauses, but I researched a bit and it seems right (although
probably not). If I remove the SummerEvening and SummerSaturday lines,
everything works fine. Here's the code:

Function Item_Write()
Set myinspector = Item.GetInspector
Set test = myInspector.ModifiedFormPages("Availability")
Set SummerWeekday = test.Controls("SummerWeekday")
Set SummerEvening = test.Controls("SummerEvening")
Set SummerSaturday = test.Controls("SummerSaturday")

If SummerWeekday.Value = True & Then
Item.Categories = Item.Categories & ",SummerWeekday"
ElseIf SummerEvening.Value = True & Then
Item.Categories = Item.Categories & ",SummerEvening"
Else SummerSaturday.Value = True & Then
Item.Categories = Item.Categories & ",SummerSaturday"

End If
End Function

Thanks.

Setting a Category
 

This is not a valid If ... Then statement:

If SummerWeekday.Value = True & Then

the & needs to be removed since there are no strings to join.

--
Sue Mosher, Outlook MVP
Author of Microsoft Outlook 2007 Programming:
Jumpstart for Power Users and Administrators
http://www.outlookcode.com/article.aspx?id=54


"Scott07" wrote in message ...
Hi,

I'm having trouble adding to my code to set a Category by clicking a
Checkbox. I'm getting an error on line 8. I think something is wrong with
the If-Then clauses, but I researched a bit and it seems right (although
probably not). If I remove the SummerEvening and SummerSaturday lines,
everything works fine. Here's the code:

Function Item_Write()
Set myinspector = Item.GetInspector
Set test = myInspector.ModifiedFormPages("Availability")
Set SummerWeekday = test.Controls("SummerWeekday")
Set SummerEvening = test.Controls("SummerEvening")
Set SummerSaturday = test.Controls("SummerSaturday")

If SummerWeekday.Value = True & Then
Item.Categories = Item.Categories & ",SummerWeekday"
ElseIf SummerEvening.Value = True & Then
Item.Categories = Item.Categories & ",SummerEvening"
Else SummerSaturday.Value = True & Then
Item.Categories = Item.Categories & ",SummerSaturday"

End If
End Function

Thanks.

Setting a Category
 

Thanks, that worked. I'm having trouble with the following code, as well.
I've tried varying combinations because I know it's a syntax problem, but
none have worked:

ElseIf test1.Value & test2.Value = True Then
Item.Categories = Item.Categories & ",Test1 & Test2"



"Sue Mosher [MVP-Outlook]" wrote:

This is not a valid If ... Then statement:

If SummerWeekday.Value = True & Then

the & needs to be removed since there are no strings to join.

--
Sue Mosher, Outlook MVP
Author of Microsoft Outlook 2007 Programming:
Jumpstart for Power Users and Administrators
http://www.outlookcode.com/article.aspx?id=54


"Scott07" wrote in message ...
Hi,

I'm having trouble adding to my code to set a Category by clicking a
Checkbox. I'm getting an error on line 8. I think something is wrong with
the If-Then clauses, but I researched a bit and it seems right (although
probably not). If I remove the SummerEvening and SummerSaturday lines,
everything works fine. Here's the code:

Function Item_Write()
Set myinspector = Item.GetInspector
Set test = myInspector.ModifiedFormPages("Availability")
Set SummerWeekday = test.Controls("SummerWeekday")
Set SummerEvening = test.Controls("SummerEvening")
Set SummerSaturday = test.Controls("SummerSaturday")

If SummerWeekday.Value = True & Then
Item.Categories = Item.Categories & ",SummerWeekday"
ElseIf SummerEvening.Value = True & Then
Item.Categories = Item.Categories & ",SummerEvening"
Else SummerSaturday.Value = True & Then
Item.Categories = Item.Categories & ",SummerSaturday"

End If
End Function

Thanks.

Setting a Category
 

What's the specific problem? It looks like what this code is supposed to do is check whether two controls both return True and, if they do, append a new category names "Test1 & Test2" to the categories that already exist on the item.

--
Sue Mosher, Outlook MVP
Author of Microsoft Outlook 2007 Programming:
Jumpstart for Power Users and Administrators
http://www.outlookcode.com/article.aspx?id=54


"Scott07" wrote in message ...
Thanks, that worked. I'm having trouble with the following code, as well.
I've tried varying combinations because I know it's a syntax problem, but
none have worked:

ElseIf test1.Value & test2.Value = True Then
Item.Categories = Item.Categories & ",Test1 & Test2"

Setting a Category
 

Thanks for the fast reply. If I only check, for example, Test1, the Category
is set properly. Also, if I check Test2, it works properly. However, if I
check both and invoke the code below, the Category will remain blank.


"Sue Mosher [MVP-Outlook]" wrote:

What's the specific problem? It looks like what this code is supposed to do is check whether two controls both return True and, if they do, append a new category names "Test1 & Test2" to the categories that already exist on the item.

--
Sue Mosher, Outlook MVP
Author of Microsoft Outlook 2007 Programming:
Jumpstart for Power Users and Administrators
http://www.outlookcode.com/article.aspx?id=54


"Scott07" wrote in message ...
Thanks, that worked. I'm having trouble with the following code, as well.
I've tried varying combinations because I know it's a syntax problem, but
none have worked:

ElseIf test1.Value & test2.Value = True Then
Item.Categories = Item.Categories & ",Test1 & Test2"

Setting a Category
 

Look at the rest of your If ... Then ... End If block. If the criteria have already been met earlier, code execution never gets to the ElseIf statement.

--
Sue Mosher, Outlook MVP
Author of Microsoft Outlook 2007 Programming:
Jumpstart for Power Users and Administrators
http://www.outlookcode.com/article.aspx?id=54


"Scott07" wrote in message ...
Thanks for the fast reply. If I only check, for example, Test1, the Category
is set properly. Also, if I check Test2, it works properly. However, if I
check both and invoke the code below, the Category will remain blank.


"Sue Mosher [MVP-Outlook]" wrote:

What's the specific problem? It looks like what this code is supposed to do is check whether two controls both return True and, if they do, append a new category names "Test1 & Test2" to the categories that already exist on the item.


"Scott07" wrote in message ...
Thanks, that worked. I'm having trouble with the following code, as well.
I've tried varying combinations because I know it's a syntax problem, but
none have worked:

ElseIf test1.Value & test2.Value = True Then
Item.Categories = Item.Categories & ",Test1 & Test2"

Setting a Category
 

Here is some code. I've commented where my code to & two statements together
is. Any help is appreciated. Thanks.

Function Item_Write()
Set myinspector = Item.GetInspector
Set test = myInspector.ModifiedFormPages("Availability")
Set Test2 = test.Controls("Test2")
Set Test3 = test.Controls("Test3")

If Test2.Value = True Then
Item.Categories = Item.Categories & ",Test2"
ElseIf Test3.Value = True Then
Item.Categories = Item.Categories & ",Test3"

//////The code below doesn’t work for some reason. It seems to output
Test2, but not Test2 & Test3. Is it because of the order of my "if" clauses?
If so, how should I restructure them. If not, please let me know what else
you believe it could be.

ElseIf Test2.Value & Test3.Value = True Then
Item.Categories = Item.Categories & ",Test2 & Test3"

End If
End Function


"Sue Mosher [MVP-Outlook]" wrote:

Look at the rest of your If ... Then ... End If block. If the criteria have already been met earlier, code execution never gets to the ElseIf statement.

--
Sue Mosher, Outlook MVP
Author of Microsoft Outlook 2007 Programming:
Jumpstart for Power Users and Administrators
http://www.outlookcode.com/article.aspx?id=54


"Scott07" wrote in message ...
Thanks for the fast reply. If I only check, for example, Test1, the Category
is set properly. Also, if I check Test2, it works properly. However, if I
check both and invoke the code below, the Category will remain blank.


"Sue Mosher [MVP-Outlook]" wrote:

What's the specific problem? It looks like what this code is supposed to do is check whether two controls both return True and, if they do, append a new category names "Test1 & Test2" to the categories that already exist on the item.


"Scott07" wrote in message ...
Thanks, that worked. I'm having trouble with the following code, as well.
I've tried varying combinations because I know it's a syntax problem, but
none have worked:

ElseIf test1.Value & test2.Value = True Then
Item.Categories = Item.Categories & ",Test1 & Test2"

Setting a Category
 

There are two problems with your code. One is with the overall logic. The other is with the second ElseIf statement.

The expression inside an If ... Then statement or an ElseIf ... Then statement must return either True or False. Here's your 2nd ElseIf statement, which does not meet that requirement:

ElseIf Test2.Value & Test3.Value = True Then

& is a string concatenation operator and has no place in this statement at all. If you want to test whether both values are true, you need two expressions, joined by And:

ElseIf (Test2.Value = True) And (Test3.Value = True) Then

or, because each of the expressions is redundant, simply:

ElseIf Test2.Value And Test3.Value Then

Now for the logic problem. If we fix the second ElseIf statement, here's what the logic looks like:

If Test2.Value = True Then
' do something
ElseIf Test3.Value = True Then
' do something
ElseIf (Test2.Value = True) And (Test3.Value = True) Then
' do something
End If

If either value is True, either the If statement or the first ElseIf statement takes care of the processing. There is no way the 2nd ElseIf statement is ever even tested in those scenarios, because the item would be processed by one of the earlier statements. There are a number of other ways to handle it, including using the expression from the 2nd ElseIf statement in the If statement. I'd recommend that you sketch out the logic with paper and pencil first.

--
Sue Mosher, Outlook MVP
Author of Microsoft Outlook 2007 Programming:
Jumpstart for Power Users and Administrators
http://www.outlookcode.com/article.aspx?id=54


"Scott07" wrote in message ...
Here is some code. I've commented where my code to & two statements together
is. Any help is appreciated. Thanks.

Function Item_Write()
Set myinspector = Item.GetInspector
Set test = myInspector.ModifiedFormPages("Availability")
Set Test2 = test.Controls("Test2")
Set Test3 = test.Controls("Test3")

If Test2.Value = True Then
Item.Categories = Item.Categories & ",Test2"
ElseIf Test3.Value = True Then
Item.Categories = Item.Categories & ",Test3"

//////The code below doesn’t work for some reason. It seems to output
Test2, but not Test2 & Test3. Is it because of the order of my "if" clauses?
If so, how should I restructure them. If not, please let me know what else
you believe it could be.

ElseIf Test2.Value & Test3.Value = True Then
Item.Categories = Item.Categories & ",Test2 & Test3"

End If
End Function


"Sue Mosher [MVP-Outlook]" wrote:

Look at the rest of your If ... Then ... End If block. If the criteria have already been met earlier, code execution never gets to the ElseIf statement.

--
Sue Mosher, Outlook MVP
Author of Microsoft Outlook 2007 Programming:
Jumpstart for Power Users and Administrators
http://www.outlookcode.com/article.aspx?id=54


"Scott07" wrote in message ...
Thanks for the fast reply. If I only check, for example, Test1, the Category
is set properly. Also, if I check Test2, it works properly. However, if I
check both and invoke the code below, the Category will remain blank.


"Sue Mosher [MVP-Outlook]" wrote:

What's the specific problem? It looks like what this code is supposed to do is check whether two controls both return True and, if they do, append a new category names "Test1 & Test2" to the categories that already exist on the item.


"Scott07" wrote in message ...
Thanks, that worked. I'm having trouble with the following code, as well.
I've tried varying combinations because I know it's a syntax problem, but
none have worked:

ElseIf test1.Value & test2.Value = True Then
Item.Categories = Item.Categories & ",Test1 & Test2"