![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
![]()
Ok heres the deal
I am trying to create a form in outlook, now that in its self is not to hard but i am not a programmer and i wanted to get a bit flash, here is what i want to do i have four tabs in my form named (for the sake of this post): Main - 1 - 2 - 3 Now i want a combo box on the "main" tab with 1,2 and 3 as options Ok thats not a problem. Now here is what i want. If the combo box is set to 1 for example i want "2" and "3" to either be invisible or be disabled. so if the person then changed the combo box to "3" then 1 and 2 would be invissable or disabled. Im sure it can be done with some sort of code to check what value is in combo box and if it matches certain criteria to either change the enabled states of the other pages or to change that value HideSomethingSomething in vb. i know there is someone who can help me but please try to keep it simple as i really dont have a clue about VB (ok i can sort of get the idea but dont have a clue about terminology) Any help would be great and make me look so clever at work |
Ads |
#2
|
|||
|
|||
![]()
You can't hide tabs in a custom form except in design mode. The best you can
do is disable them in code, but they'll still be visible but not "clickable". -- Eric Legault (Outlook MVP, MCDBA, MCTS: Messaging & Collaboration) Try Picture Attachments Wizard for Outlook: http://www.collaborativeinnovations.ca Blog: http://blogs.officezealot.com/legault/ "Ceige" wrote: Ok heres the deal I am trying to create a form in outlook, now that in its self is not to hard but i am not a programmer and i wanted to get a bit flash, here is what i want to do i have four tabs in my form named (for the sake of this post): Main - 1 - 2 - 3 Now i want a combo box on the "main" tab with 1,2 and 3 as options Ok thats not a problem. Now here is what i want. If the combo box is set to 1 for example i want "2" and "3" to either be invisible or be disabled. so if the person then changed the combo box to "3" then 1 and 2 would be invissable or disabled. Im sure it can be done with some sort of code to check what value is in combo box and if it matches certain criteria to either change the enabled states of the other pages or to change that value HideSomethingSomething in vb. i know there is someone who can help me but please try to keep it simple as i really dont have a clue about VB (ok i can sort of get the idea but dont have a clue about terminology) Any help would be great and make me look so clever at work |
#3
|
|||
|
|||
![]()
Thank you Eric i thought i was at a loss with this one
Ok my next question is "yep you guessed it" how to disable the forms using the combo box Just remeber a coding virgin here Hehe Anyway thanks peeps "Eric Legault [MVP - Outlook]" wrote: You can't hide tabs in a custom form except in design mode. The best you can do is disable them in code, but they'll still be visible but not "clickable". -- Eric Legault (Outlook MVP, MCDBA, MCTS: Messaging & Collaboration) Try Picture Attachments Wizard for Outlook: http://www.collaborativeinnovations.ca Blog: http://blogs.officezealot.com/legault/ "Ceige" wrote: Ok heres the deal I am trying to create a form in outlook, now that in its self is not to hard but i am not a programmer and i wanted to get a bit flash, here is what i want to do i have four tabs in my form named (for the sake of this post): Main - 1 - 2 - 3 Now i want a combo box on the "main" tab with 1,2 and 3 as options Ok thats not a problem. Now here is what i want. If the combo box is set to 1 for example i want "2" and "3" to either be invisible or be disabled. so if the person then changed the combo box to "3" then 1 and 2 would be invissable or disabled. Im sure it can be done with some sort of code to check what value is in combo box and if it matches certain criteria to either change the enabled states of the other pages or to change that value HideSomethingSomething in vb. i know there is someone who can help me but please try to keep it simple as i really dont have a clue about VB (ok i can sort of get the idea but dont have a clue about terminology) Any help would be great and make me look so clever at work |
#4
|
|||
|
|||
![]()
Assuming you want the selected number to indicate which page you want
disabled, the code would work like this if you created a field called MyComboBoxField and bound it to a combo box: Sub Item_CustomPropertyChange(ByVal Name) If Name = "MyComboBoxField" Then Select Case Item.UserProperties("MyComboBoxField").Value Case 1 Item.GetInspector.ModifiedFormPages("1").Enabled = False Item.GetInspector.ModifiedFormPages("2").Enabled = True Item.GetInspector.ModifiedFormPages("3").Enabled = True Case 2 Item.GetInspector.ModifiedFormPages("1").Enabled = True Item.GetInspector.ModifiedFormPages("2").Enabled = False Item.GetInspector.ModifiedFormPages("3").Enabled = True Case 3 Item.GetInspector.ModifiedFormPages("1").Enabled = True Item.GetInspector.ModifiedFormPages("2").Enabled = True Item.GetInspector.ModifiedFormPages("3").Enabled = False End Select End If End Sub -- Eric Legault (Outlook MVP, MCDBA, MCTS: Messaging & Collaboration) Try Picture Attachments Wizard for Outlook: http://www.collaborativeinnovations.ca Blog: http://blogs.officezealot.com/legault/ "Ceige" wrote: Thank you Eric i thought i was at a loss with this one Ok my next question is "yep you guessed it" how to disable the forms using the combo box Just remeber a coding virgin here Hehe Anyway thanks peeps "Eric Legault [MVP - Outlook]" wrote: You can't hide tabs in a custom form except in design mode. The best you can do is disable them in code, but they'll still be visible but not "clickable". -- Eric Legault (Outlook MVP, MCDBA, MCTS: Messaging & Collaboration) Try Picture Attachments Wizard for Outlook: http://www.collaborativeinnovations.ca Blog: http://blogs.officezealot.com/legault/ "Ceige" wrote: Ok heres the deal I am trying to create a form in outlook, now that in its self is not to hard but i am not a programmer and i wanted to get a bit flash, here is what i want to do i have four tabs in my form named (for the sake of this post): Main - 1 - 2 - 3 Now i want a combo box on the "main" tab with 1,2 and 3 as options Ok thats not a problem. Now here is what i want. If the combo box is set to 1 for example i want "2" and "3" to either be invisible or be disabled. so if the person then changed the combo box to "3" then 1 and 2 would be invissable or disabled. Im sure it can be done with some sort of code to check what value is in combo box and if it matches certain criteria to either change the enabled states of the other pages or to change that value HideSomethingSomething in vb. i know there is someone who can help me but please try to keep it simple as i really dont have a clue about VB (ok i can sort of get the idea but dont have a clue about terminology) Any help would be great and make me look so clever at work |
#5
|
|||
|
|||
![]()
There's an easier way -- ShowFormPage /HideFormPage, as in:
Item.GetInspector.HideFormPage "1" -- Sue Mosher, Outlook MVP Author of Configuring Microsoft Outlook 2003 http://www.turtleflock.com/olconfig/index.htm and Microsoft Outlook Programming - Jumpstart for Administrators, Power Users, and Developers http://www.outlookcode.com/jumpstart.aspx "Eric Legault [MVP - Outlook]" wrote in message ... Assuming you want the selected number to indicate which page you want disabled, the code would work like this if you created a field called MyComboBoxField and bound it to a combo box: Sub Item_CustomPropertyChange(ByVal Name) If Name = "MyComboBoxField" Then Select Case Item.UserProperties("MyComboBoxField").Value Case 1 Item.GetInspector.ModifiedFormPages("1").Enabled = False Item.GetInspector.ModifiedFormPages("2").Enabled = True Item.GetInspector.ModifiedFormPages("3").Enabled = True Case 2 Item.GetInspector.ModifiedFormPages("1").Enabled = True Item.GetInspector.ModifiedFormPages("2").Enabled = False Item.GetInspector.ModifiedFormPages("3").Enabled = True Case 3 Item.GetInspector.ModifiedFormPages("1").Enabled = True Item.GetInspector.ModifiedFormPages("2").Enabled = True Item.GetInspector.ModifiedFormPages("3").Enabled = False End Select End If End Sub -- Eric Legault (Outlook MVP, MCDBA, MCTS: Messaging & Collaboration) Try Picture Attachments Wizard for Outlook: http://www.collaborativeinnovations.ca Blog: http://blogs.officezealot.com/legault/ "Ceige" wrote: Thank you Eric i thought i was at a loss with this one Ok my next question is "yep you guessed it" how to disable the forms using the combo box Just remeber a coding virgin here Hehe Anyway thanks peeps "Eric Legault [MVP - Outlook]" wrote: You can't hide tabs in a custom form except in design mode. The best you can do is disable them in code, but they'll still be visible but not "clickable". -- Eric Legault (Outlook MVP, MCDBA, MCTS: Messaging & Collaboration) Try Picture Attachments Wizard for Outlook: http://www.collaborativeinnovations.ca Blog: http://blogs.officezealot.com/legault/ "Ceige" wrote: Ok heres the deal I am trying to create a form in outlook, now that in its self is not to hard but i am not a programmer and i wanted to get a bit flash, here is what i want to do i have four tabs in my form named (for the sake of this post): Main - 1 - 2 - 3 Now i want a combo box on the "main" tab with 1,2 and 3 as options Ok thats not a problem. Now here is what i want. If the combo box is set to 1 for example i want "2" and "3" to either be invisible or be disabled. so if the person then changed the combo box to "3" then 1 and 2 would be invissable or disabled. Im sure it can be done with some sort of code to check what value is in combo box and if it matches certain criteria to either change the enabled states of the other pages or to change that value HideSomethingSomething in vb. i know there is someone who can help me but please try to keep it simple as i really dont have a clue about VB (ok i can sort of get the idea but dont have a clue about terminology) Any help would be great and make me look so clever at work |
#6
|
|||
|
|||
![]()
Oh good grief! See Sue, this is what happens when I don't have a forms
project in six months. Something was chattering in the back of my head about this, because I knew I fought with this before but couldn't recall for what. Thanks for the heads up! -- Eric Legault (Outlook MVP, MCDBA, MCTS: Messaging & Collaboration) Try Picture Attachments Wizard for Outlook: http://www.collaborativeinnovations.ca Blog: http://blogs.officezealot.com/legault/ "Sue Mosher [MVP-Outlook]" wrote: There's an easier way -- ShowFormPage /HideFormPage, as in: Item.GetInspector.HideFormPage "1" -- Sue Mosher, Outlook MVP Author of Configuring Microsoft Outlook 2003 http://www.turtleflock.com/olconfig/index.htm and Microsoft Outlook Programming - Jumpstart for Administrators, Power Users, and Developers http://www.outlookcode.com/jumpstart.aspx "Eric Legault [MVP - Outlook]" wrote in message ... Assuming you want the selected number to indicate which page you want disabled, the code would work like this if you created a field called MyComboBoxField and bound it to a combo box: Sub Item_CustomPropertyChange(ByVal Name) If Name = "MyComboBoxField" Then Select Case Item.UserProperties("MyComboBoxField").Value Case 1 Item.GetInspector.ModifiedFormPages("1").Enabled = False Item.GetInspector.ModifiedFormPages("2").Enabled = True Item.GetInspector.ModifiedFormPages("3").Enabled = True Case 2 Item.GetInspector.ModifiedFormPages("1").Enabled = True Item.GetInspector.ModifiedFormPages("2").Enabled = False Item.GetInspector.ModifiedFormPages("3").Enabled = True Case 3 Item.GetInspector.ModifiedFormPages("1").Enabled = True Item.GetInspector.ModifiedFormPages("2").Enabled = True Item.GetInspector.ModifiedFormPages("3").Enabled = False End Select End If End Sub -- Eric Legault (Outlook MVP, MCDBA, MCTS: Messaging & Collaboration) Try Picture Attachments Wizard for Outlook: http://www.collaborativeinnovations.ca Blog: http://blogs.officezealot.com/legault/ "Ceige" wrote: Thank you Eric i thought i was at a loss with this one Ok my next question is "yep you guessed it" how to disable the forms using the combo box Just remeber a coding virgin here Hehe Anyway thanks peeps "Eric Legault [MVP - Outlook]" wrote: You can't hide tabs in a custom form except in design mode. The best you can do is disable them in code, but they'll still be visible but not "clickable". -- Eric Legault (Outlook MVP, MCDBA, MCTS: Messaging & Collaboration) Try Picture Attachments Wizard for Outlook: http://www.collaborativeinnovations.ca Blog: http://blogs.officezealot.com/legault/ "Ceige" wrote: Ok heres the deal I am trying to create a form in outlook, now that in its self is not to hard but i am not a programmer and i wanted to get a bit flash, here is what i want to do i have four tabs in my form named (for the sake of this post): Main - 1 - 2 - 3 Now i want a combo box on the "main" tab with 1,2 and 3 as options Ok thats not a problem. Now here is what i want. If the combo box is set to 1 for example i want "2" and "3" to either be invisible or be disabled. so if the person then changed the combo box to "3" then 1 and 2 would be invissable or disabled. Im sure it can be done with some sort of code to check what value is in combo box and if it matches certain criteria to either change the enabled states of the other pages or to change that value HideSomethingSomething in vb. i know there is someone who can help me but please try to keep it simple as i really dont have a clue about VB (ok i can sort of get the idea but dont have a clue about terminology) Any help would be great and make me look so clever at work |
#7
|
|||
|
|||
![]()
Thank you so so so much Eric and Sue, you have brightened up my morning
"Eric Legault [MVP - Outlook]" wrote: Oh good grief! See Sue, this is what happens when I don't have a forms project in six months. Something was chattering in the back of my head about this, because I knew I fought with this before but couldn't recall for what. Thanks for the heads up! -- Eric Legault (Outlook MVP, MCDBA, MCTS: Messaging & Collaboration) Try Picture Attachments Wizard for Outlook: http://www.collaborativeinnovations.ca Blog: http://blogs.officezealot.com/legault/ "Sue Mosher [MVP-Outlook]" wrote: There's an easier way -- ShowFormPage /HideFormPage, as in: Item.GetInspector.HideFormPage "1" -- Sue Mosher, Outlook MVP Author of Configuring Microsoft Outlook 2003 http://www.turtleflock.com/olconfig/index.htm and Microsoft Outlook Programming - Jumpstart for Administrators, Power Users, and Developers http://www.outlookcode.com/jumpstart.aspx "Eric Legault [MVP - Outlook]" wrote in message ... Assuming you want the selected number to indicate which page you want disabled, the code would work like this if you created a field called MyComboBoxField and bound it to a combo box: Sub Item_CustomPropertyChange(ByVal Name) If Name = "MyComboBoxField" Then Select Case Item.UserProperties("MyComboBoxField").Value Case 1 Item.GetInspector.ModifiedFormPages("1").Enabled = False Item.GetInspector.ModifiedFormPages("2").Enabled = True Item.GetInspector.ModifiedFormPages("3").Enabled = True Case 2 Item.GetInspector.ModifiedFormPages("1").Enabled = True Item.GetInspector.ModifiedFormPages("2").Enabled = False Item.GetInspector.ModifiedFormPages("3").Enabled = True Case 3 Item.GetInspector.ModifiedFormPages("1").Enabled = True Item.GetInspector.ModifiedFormPages("2").Enabled = True Item.GetInspector.ModifiedFormPages("3").Enabled = False End Select End If End Sub -- Eric Legault (Outlook MVP, MCDBA, MCTS: Messaging & Collaboration) Try Picture Attachments Wizard for Outlook: http://www.collaborativeinnovations.ca Blog: http://blogs.officezealot.com/legault/ "Ceige" wrote: Thank you Eric i thought i was at a loss with this one Ok my next question is "yep you guessed it" how to disable the forms using the combo box Just remeber a coding virgin here Hehe Anyway thanks peeps "Eric Legault [MVP - Outlook]" wrote: You can't hide tabs in a custom form except in design mode. The best you can do is disable them in code, but they'll still be visible but not "clickable". -- Eric Legault (Outlook MVP, MCDBA, MCTS: Messaging & Collaboration) Try Picture Attachments Wizard for Outlook: http://www.collaborativeinnovations.ca Blog: http://blogs.officezealot.com/legault/ "Ceige" wrote: Ok heres the deal I am trying to create a form in outlook, now that in its self is not to hard but i am not a programmer and i wanted to get a bit flash, here is what i want to do i have four tabs in my form named (for the sake of this post): Main - 1 - 2 - 3 Now i want a combo box on the "main" tab with 1,2 and 3 as options Ok thats not a problem. Now here is what i want. If the combo box is set to 1 for example i want "2" and "3" to either be invisible or be disabled. so if the person then changed the combo box to "3" then 1 and 2 would be invissable or disabled. Im sure it can be done with some sort of code to check what value is in combo box and if it matches certain criteria to either change the enabled states of the other pages or to change that value HideSomethingSomething in vb. i know there is someone who can help me but please try to keep it simple as i really dont have a clue about VB (ok i can sort of get the idea but dont have a clue about terminology) Any help would be great and make me look so clever at work |
#8
|
|||
|
|||
![]()
ok im back AGAIN hehe
Right i am going wrong somewhere I have Four pages in my form labelled "Main" - "1" - "2" - "3" On "Main" is A Combobox with a field called "Local" and then Values of 1,2,3 In the other pages is just text boxes for now. In my script is the following thanks to your help so far Sub Item_CustomPropertyChnage(ByVal Name) If Name = "Local" Then Select Case Item.UserProperties("Local").Value Case 1 Item.GetInspector.ShowFormPage("1") Item.GetInspector.HideFormPage("2") Item.GetInspector.HideFormPage("3") Case 2 Item.GetInspector.HideFormPage("1") Item.GetInspector.ShowFormPage("2") Item.GetInspector.HideFormPage("3") Case 3 Item.GetInspector.HideFormPage("1") Item.GetInspector.HideFormPage("2") Item.GetInspector.ShowFormPage("3") End Select End If End Sub Now is there something totally wrong or should this work. When i run the form i can see all pages and edit each one "Ceige" wrote: Thank you so so so much Eric and Sue, you have brightened up my morning "Eric Legault [MVP - Outlook]" wrote: Oh good grief! See Sue, this is what happens when I don't have a forms project in six months. Something was chattering in the back of my head about this, because I knew I fought with this before but couldn't recall for what. Thanks for the heads up! -- Eric Legault (Outlook MVP, MCDBA, MCTS: Messaging & Collaboration) Try Picture Attachments Wizard for Outlook: http://www.collaborativeinnovations.ca Blog: http://blogs.officezealot.com/legault/ "Sue Mosher [MVP-Outlook]" wrote: There's an easier way -- ShowFormPage /HideFormPage, as in: Item.GetInspector.HideFormPage "1" -- Sue Mosher, Outlook MVP Author of Configuring Microsoft Outlook 2003 http://www.turtleflock.com/olconfig/index.htm and Microsoft Outlook Programming - Jumpstart for Administrators, Power Users, and Developers http://www.outlookcode.com/jumpstart.aspx "Eric Legault [MVP - Outlook]" wrote in message ... Assuming you want the selected number to indicate which page you want disabled, the code would work like this if you created a field called MyComboBoxField and bound it to a combo box: Sub Item_CustomPropertyChange(ByVal Name) If Name = "MyComboBoxField" Then Select Case Item.UserProperties("MyComboBoxField").Value Case 1 Item.GetInspector.ModifiedFormPages("1").Enabled = False Item.GetInspector.ModifiedFormPages("2").Enabled = True Item.GetInspector.ModifiedFormPages("3").Enabled = True Case 2 Item.GetInspector.ModifiedFormPages("1").Enabled = True Item.GetInspector.ModifiedFormPages("2").Enabled = False Item.GetInspector.ModifiedFormPages("3").Enabled = True Case 3 Item.GetInspector.ModifiedFormPages("1").Enabled = True Item.GetInspector.ModifiedFormPages("2").Enabled = True Item.GetInspector.ModifiedFormPages("3").Enabled = False End Select End If End Sub -- Eric Legault (Outlook MVP, MCDBA, MCTS: Messaging & Collaboration) Try Picture Attachments Wizard for Outlook: http://www.collaborativeinnovations.ca Blog: http://blogs.officezealot.com/legault/ "Ceige" wrote: Thank you Eric i thought i was at a loss with this one Ok my next question is "yep you guessed it" how to disable the forms using the combo box Just remeber a coding virgin here Hehe Anyway thanks peeps "Eric Legault [MVP - Outlook]" wrote: You can't hide tabs in a custom form except in design mode. The best you can do is disable them in code, but they'll still be visible but not "clickable". -- Eric Legault (Outlook MVP, MCDBA, MCTS: Messaging & Collaboration) Try Picture Attachments Wizard for Outlook: http://www.collaborativeinnovations.ca Blog: http://blogs.officezealot.com/legault/ "Ceige" wrote: Ok heres the deal I am trying to create a form in outlook, now that in its self is not to hard but i am not a programmer and i wanted to get a bit flash, here is what i want to do i have four tabs in my form named (for the sake of this post): Main - 1 - 2 - 3 Now i want a combo box on the "main" tab with 1,2 and 3 as options Ok thats not a problem. Now here is what i want. If the combo box is set to 1 for example i want "2" and "3" to either be invisible or be disabled. so if the person then changed the combo box to "3" then 1 and 2 would be invissable or disabled. Im sure it can be done with some sort of code to check what value is in combo box and if it matches certain criteria to either change the enabled states of the other pages or to change that value HideSomethingSomething in vb. i know there is someone who can help me but please try to keep it simple as i really dont have a clue about VB (ok i can sort of get the idea but dont have a clue about terminology) Any help would be great and make me look so clever at work |
#9
|
|||
|
|||
![]()
If Local is a text property, you need to use string values for your Case statements -- "1" not 1.
-- Sue Mosher, Outlook MVP Author of Configuring Microsoft Outlook 2003 http://www.turtleflock.com/olconfig/index.htm and Microsoft Outlook Programming - Jumpstart for Administrators, Power Users, and Developers http://www.outlookcode.com/jumpstart.aspx "Ceige" wrote in message ... ok im back AGAIN hehe Right i am going wrong somewhere I have Four pages in my form labelled "Main" - "1" - "2" - "3" On "Main" is A Combobox with a field called "Local" and then Values of 1,2,3 In the other pages is just text boxes for now. In my script is the following thanks to your help so far Sub Item_CustomPropertyChnage(ByVal Name) If Name = "Local" Then Select Case Item.UserProperties("Local").Value Case 1 Item.GetInspector.ShowFormPage("1") Item.GetInspector.HideFormPage("2") Item.GetInspector.HideFormPage("3") Case 2 Item.GetInspector.HideFormPage("1") Item.GetInspector.ShowFormPage("2") Item.GetInspector.HideFormPage("3") Case 3 Item.GetInspector.HideFormPage("1") Item.GetInspector.HideFormPage("2") Item.GetInspector.ShowFormPage("3") End Select End If End Sub Now is there something totally wrong or should this work. When i run the form i can see all pages and edit each one |
#10
|
|||
|
|||
![]()
Ok getting no where here hehe
Right tried adding quotes around the numbers after case and still no effect, also tried the enabled=true etc eric suggested and nothing. Here is a few more details. The Combo box has a name of "ComboBox1" Under Value it says in the following order: Choose Field : Local Type : Text Format :Text (Grayed out) List Type : DropDown Property to use : Value Possible Values : 1;2;3 There is no initial value and it is not required If i design a form and then goto "form" and "run this form" it does run script doesnt it??? Again i cant thank you enough for your time in this matter "Sue Mosher [MVP-Outlook]" wrote: If Local is a text property, you need to use string values for your Case statements -- "1" not 1. -- Sue Mosher, Outlook MVP Author of Configuring Microsoft Outlook 2003 http://www.turtleflock.com/olconfig/index.htm and Microsoft Outlook Programming - Jumpstart for Administrators, Power Users, and Developers http://www.outlookcode.com/jumpstart.aspx "Ceige" wrote in message ... ok im back AGAIN hehe Right i am going wrong somewhere I have Four pages in my form labelled "Main" - "1" - "2" - "3" On "Main" is A Combobox with a field called "Local" and then Values of 1,2,3 In the other pages is just text boxes for now. In my script is the following thanks to your help so far Sub Item_CustomPropertyChnage(ByVal Name) If Name = "Local" Then Select Case Item.UserProperties("Local").Value Case 1 Item.GetInspector.ShowFormPage("1") Item.GetInspector.HideFormPage("2") Item.GetInspector.HideFormPage("3") Case 2 Item.GetInspector.HideFormPage("1") Item.GetInspector.ShowFormPage("2") Item.GetInspector.HideFormPage("3") Case 3 Item.GetInspector.HideFormPage("1") Item.GetInspector.HideFormPage("2") Item.GetInspector.ShowFormPage("3") End Select End If End Sub Now is there something totally wrong or should this work. When i run the form i can see all pages and edit each one |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Hiding Forms | Ceige | Outlook - Using Forms | 2 | May 3rd 06 03:21 PM |
forms and templates | rexmann | Outlook - Calandaring | 2 | March 28th 06 06:04 PM |
Convert Forms | Jack | Outlook - Using Forms | 5 | March 22nd 06 05:54 AM |
Forms | SyStym | Outlook and VBA | 1 | February 24th 06 02:32 PM |
Forms | Mostro | Outlook - General Queries | 2 | January 26th 06 05:34 PM |