Dear Experts,

Hyperlinks in my e-mail messages don't work. There's no reaction to the
mouse click. Anyone know what causes this?

Sincerely,

Karl

Are you using IE7 Beta by any chance? If so:

Courtesy of MVP Robear Dyer:

[Control Panel Add/Remove Programs ] Set Program Access and Defaults
Browser: IE *must* be chosen here if you're running IE7 Beta 2 and want such
links to work.

Beta testers of IE7 Public Preview are asked to post their comments to
microsoft.public.internetexplorer.general newsgroup.

On the web:
http://www.microsoft.com/communities...orer. general

In your newsreader:
news://msnews.microsoft.com/microsof...plorer.general

If you are not using IE7:

From:
http://www.fjsmjs.com/OE/nolinks.htm

If nothing happens when you click a link:
Open Windows Explorer.
Go to Tools | Folder Options | File Types.
Scroll down to URL:HyperText Transfer Protocol (NOT URL:Internet Shortcut)
and select it.
Click Edit or Advanced, depending on your Windows version.
Select 'open'.
Click Edit.

"Application used to perform this action" should read:

"C:\PROGRAM FILES\INTERNET EXPLORER\iexplore.exe" -nohome
(Check the path to iexplore.exe to make sure that is correct and use the
double quotes.)

DDE should be checked and in the boxes below it you should have:

#1:
"%1",,-1,0,,,,
#2
IExplore
#3 (blank)

#4
WWW_OpenURL

URL:HyperText Transfer Protocol with Privacy should be the same.

Sometimes it is necessary to uncheck Use DDE.



If you get a blank page:


1. Click Start, and then click Run.

2. In the Open box, type:

regsvr32 urlmon.dll

3. Click OK, and then click OK again when you receive the following message:

DllRegisterServer in urlmon.dll succeeded.


4. If that doesn't fix it, see this article:

http://www.mvps.org/inetexplorer/answers/26.html

5. If you are using WinXP try this:
http://www.mvps.org/sramesh2k/reg/IE...lt_Browser.reg


You can also try this:

Go to Start/run, and type SFC (msconfig for WinXP).
Choose 'Extract One File From Installation Disk' ("Expand File" for WinXP).
Type oleaut32.dll, not worrying about its location. Then, click Start.

Next to 'Restore From', type in or browse for the file's location, which is
probably in the Win98 (i386 for WinXP) folder of your installation CD-ROM
(typically D:\Win98), or in your Windows\Options\Cabs (Windows\i386 for
WinXP) folder, as the case may be.

Then, next to 'Save File In', enter C:\Windows\System (C:\Windows\System32
for WinXP), and click OK. System File Checker (or msconfig) looks for the
file, saves it as you requested, and then tells you that 'the file has been
successfully extracted'.

You may need to reboot.
--
Bruce Hagen
MS MVP - Outlook Express
~IB-CA~

"Karl Neumann" wrote in message
news:XlIjg.28801$QP4.7217@fed1read12...
Dear Experts,

Hyperlinks in my e-mail messages don't work. There's no reaction to the
mouse click. Anyone know what causes this?

Sincerely,

Karl

Thank You, Bruce!

Unchecking Use DDE under URL: Hyper Text Transfer Protocol with Privacy
solved the problem. Your quick response to my post is much appreciated.

Best wishes,

Karl


"Bruce Hagen" wrote in message
...
Are you using IE7 Beta by any chance? If so:

Courtesy of MVP Robear Dyer:

[Control Panel Add/Remove Programs ] Set Program Access and Defaults
Browser: IE *must* be chosen here if you're running IE7 Beta 2 and want
such
links to work.

Beta testers of IE7 Public Preview are asked to post their comments to
microsoft.public.internetexplorer.general newsgroup.

On the web:
http://www.microsoft.com/communities...orer. general

In your newsreader:
news://msnews.microsoft.com/microsof...plorer.general

If you are not using IE7:

From:
http://www.fjsmjs.com/OE/nolinks.htm

If nothing happens when you click a link:
Open Windows Explorer.
Go to Tools | Folder Options | File Types.
Scroll down to URL:HyperText Transfer Protocol (NOT URL:Internet Shortcut)
and select it.
Click Edit or Advanced, depending on your Windows version.
Select 'open'.
Click Edit.

"Application used to perform this action" should read:

"C:\PROGRAM FILES\INTERNET EXPLORER\iexplore.exe" -nohome
(Check the path to iexplore.exe to make sure that is correct and use the
double quotes.)

DDE should be checked and in the boxes below it you should have:

#1:
"%1",,-1,0,,,,
#2
IExplore
#3 (blank)

#4
WWW_OpenURL

URL:HyperText Transfer Protocol with Privacy should be the same.

Sometimes it is necessary to uncheck Use DDE.



If you get a blank page:


1. Click Start, and then click Run.

2. In the Open box, type:

regsvr32 urlmon.dll

3. Click OK, and then click OK again when you receive the following
message:

DllRegisterServer in urlmon.dll succeeded.


4. If that doesn't fix it, see this article:

http://www.mvps.org/inetexplorer/answers/26.html

5. If you are using WinXP try this:
http://www.mvps.org/sramesh2k/reg/IE...lt_Browser.reg


You can also try this:

Go to Start/run, and type SFC (msconfig for WinXP).
Choose 'Extract One File From Installation Disk' ("Expand File" for
WinXP).
Type oleaut32.dll, not worrying about its location. Then, click Start.

Next to 'Restore From', type in or browse for the file's location, which
is probably in the Win98 (i386 for WinXP) folder of your installation
CD-ROM (typically D:\Win98), or in your Windows\Options\Cabs (Windows\i386
for WinXP) folder, as the case may be.

Then, next to 'Save File In', enter C:\Windows\System (C:\Windows\System32
for WinXP), and click OK. System File Checker (or msconfig) looks for the
file, saves it as you requested, and then tells you that 'the file has
been successfully extracted'.

You may need to reboot.
--
Bruce Hagen
MS MVP - Outlook Express
~IB-CA~

"Karl Neumann" wrote in message
news:XlIjg.28801$QP4.7217@fed1read12...
Dear Experts,

Hyperlinks in my e-mail messages don't work. There's no reaction to the
mouse click. Anyone know what causes this?

Sincerely,

Karl

You're welcome. Glad it's fixed.
--
Bruce Hagen
MS MVP - Outlook Express
~IB-CA~

"Karl Neumann" wrote in message
news:w9Jjg.28802$QP4.2591@fed1read12...
Thank You, Bruce!

Unchecking Use DDE under URL: Hyper Text Transfer Protocol with Privacy
solved the problem. Your quick response to my post is much appreciated.

Best wishes,

Karl


"Bruce Hagen" wrote in message
...
Are you using IE7 Beta by any chance? If so:

Courtesy of MVP Robear Dyer:

[Control Panel Add/Remove Programs ] Set Program Access and Defaults
Browser: IE *must* be chosen here if you're running IE7 Beta 2 and want
such
links to work.

Beta testers of IE7 Public Preview are asked to post their comments to
microsoft.public.internetexplorer.general newsgroup.

On the web:
http://www.microsoft.com/communities...orer. general

In your newsreader:
news://msnews.microsoft.com/microsof...plorer.general

If you are not using IE7:

From:
http://www.fjsmjs.com/OE/nolinks.htm

If nothing happens when you click a link:
Open Windows Explorer.
Go to Tools | Folder Options | File Types.
Scroll down to URL:HyperText Transfer Protocol (NOT URL:Internet
Shortcut) and select it.
Click Edit or Advanced, depending on your Windows version.
Select 'open'.
Click Edit.

"Application used to perform this action" should read:

"C:\PROGRAM FILES\INTERNET EXPLORER\iexplore.exe" -nohome
(Check the path to iexplore.exe to make sure that is correct and use the
double quotes.)

DDE should be checked and in the boxes below it you should have:

#1:
"%1",,-1,0,,,,
#2
IExplore
#3 (blank)

#4
WWW_OpenURL

URL:HyperText Transfer Protocol with Privacy should be the same.

Sometimes it is necessary to uncheck Use DDE.



If you get a blank page:


1. Click Start, and then click Run.

2. In the Open box, type:

regsvr32 urlmon.dll

3. Click OK, and then click OK again when you receive the following
message:

DllRegisterServer in urlmon.dll succeeded.


4. If that doesn't fix it, see this article:

http://www.mvps.org/inetexplorer/answers/26.html

5. If you are using WinXP try this:
http://www.mvps.org/sramesh2k/reg/IE...lt_Browser.reg


You can also try this:

Go to Start/run, and type SFC (msconfig for WinXP).
Choose 'Extract One File From Installation Disk' ("Expand File" for
WinXP).
Type oleaut32.dll, not worrying about its location. Then, click Start.

Next to 'Restore From', type in or browse for the file's location, which
is probably in the Win98 (i386 for WinXP) folder of your installation
CD-ROM (typically D:\Win98), or in your Windows\Options\Cabs
(Windows\i386 for WinXP) folder, as the case may be.

Then, next to 'Save File In', enter C:\Windows\System
(C:\Windows\System32 for WinXP), and click OK. System File Checker (or
msconfig) looks for the file, saves it as you requested, and then tells
you that 'the file has been successfully extracted'.

You may need to reboot.
--
Bruce Hagen
MS MVP - Outlook Express
~IB-CA~

"Karl Neumann" wrote in message
news:XlIjg.28801$QP4.7217@fed1read12...
Dear Experts,

Hyperlinks in my e-mail messages don't work. There's no reaction to the
mouse click. Anyone know what causes this?

Sincerely,

Karl