Cannot go to to any page highlighted in e-mails, newsletters or even to the
internet help under tools when in Outlook Express 6. I have to highlight,
copy and paste to go to the selected pages. Any ideas? Thanks.

Are you refering to clicking on a link in an e-mail?

From:
http://www.fjsmjs.com/OE/nolinks.htm

If nothing happens when you click a link:
Open Windows Explorer.
Go to Tools | Folder Options | File Types.
Scroll down to URL:HyperText Transfer Protocol and select it.
Click Edit or Advanced, depending on your Windows version.
Select 'open'.
Click Edit.

"Application used to perform this action" should read:

"C:\PROGRAM FILES\INTERNET EXPLORER\iexplore.exe" -nohome
(Check the path to iexplore.exe to make sure that is correct and use the
double quotes.)

DDE should be checked and in the boxes below it you should have:

#1:
"%1",,-1,0,,,,
#2
IExplore
#3 (blank)

#4
WWW_OpenURL

URL:HyperText Transfer Protocol with Privacy should be the same.

Sometimes it is necessary to uncheck Use DDE.



If you get a blank page:


1. Click Start, and then click Run.

2. In the Open box, type:

regsvr32 urlmon.dll

3. Click OK, and then click OK again when you receive the following message:

DllRegisterServer in urlmon.dll succeeded.


4. If that doesn't fix it, see this article:

http://www.mvps.org/inetexplorer/answers.htm#new_window

5. If you are using WinXP try this:
http://www.mvps.org/sramesh2k/reg/IE...lt_Browser.reg


You can also try this:

Go to Start/run, and type SFC (msconfig for WinXP).
Choose 'Extract One File From Installation Disk' ("Expand File" for WinXP).
Type oleaut32.dll, not worrying about its location. Then, click Start.

Next to 'Restore From', type in or browse for the file's location, which is
probably in the Win98 (i386 for WinXP) folder of your installation CD-ROM
(typically D:\Win98), or in your Windows\Options\Cabs (Windows\i386 for
WinXP) folder, as the case may be.

Then, next to 'Save File In', enter C:\Windows\System (C:\Windows\System32
for WinXP), and click OK. System File Checker (or msconfig) looks for the
file, saves it as you requested, and then tells you that 'the file has been
successfully extracted'.

You may need to reboot.
--
Bruce Hagen
MS MVP - Outlook Express
~IB-CA~

"Toad15" wrote in message
news
Cannot go to to any page highlighted in e-mails, newsletters or even to
the
internet help under tools when in Outlook Express 6. I have to highlight,
copy and paste to go to the selected pages. Any ideas? Thanks.

Bruce Hagen wrote:
Are you refering to clicking on a link in an e-mail?

From:
http://www.fjsmjs.com/OE/nolinks.htm

If nothing happens when you click a link:
Open Windows Explorer.
Go to Tools | Folder Options | File Types.
Scroll down to URL:HyperText Transfer Protocol and select it.
Click Edit or Advanced, depending on your Windows version.
Select 'open'.
Click Edit.

"Application used to perform this action" should read:

"C:\PROGRAM FILES\INTERNET EXPLORER\iexplore.exe" -nohome
(Check the path to iexplore.exe to make sure that is correct and use
the double quotes.)

DDE should be checked and in the boxes below it you should have:

#1:
"%1",,-1,0,,,,
#2
IExplore
#3 (blank)

#4
WWW_OpenURL

URL:HyperText Transfer Protocol with Privacy should be the same.

Sometimes it is necessary to uncheck Use DDE.



If you get a blank page:


1. Click Start, and then click Run.

2. In the Open box, type:

regsvr32 urlmon.dll

3. Click OK, and then click OK again when you receive the following
message:
DllRegisterServer in urlmon.dll succeeded.


4. If that doesn't fix it, see this article:

http://www.mvps.org/inetexplorer/answers.htm#new_window

5. If you are using WinXP try this:
http://www.mvps.org/sramesh2k/reg/IE...lt_Browser.reg


You can also try this:

Go to Start/run, and type SFC (msconfig for WinXP).
Choose 'Extract One File From Installation Disk' ("Expand File" for
WinXP). Type oleaut32.dll, not worrying about its location. Then,
click Start.
Next to 'Restore From', type in or browse for the file's location,
which is probably in the Win98 (i386 for WinXP) folder of your
installation CD-ROM (typically D:\Win98), or in your
Windows\Options\Cabs (Windows\i386 for WinXP) folder, as the case may
be.
Then, next to 'Save File In', enter C:\Windows\System
(C:\Windows\System32 for WinXP), and click OK. System File Checker
(or msconfig) looks for the file, saves it as you requested, and then
tells you that 'the file has been successfully extracted'.

You may need to reboot.



Bruce, I have been here before and find you very helpful and for that I am
grateful. However I am asking for help again in this matter. I need to know
what might be the cause of this returning problem and if you can help me
here I promise to make a donation.

Best regards.

Jimmy

"Toad15" wrote in message
news
Cannot go to to any page highlighted in e-mails, newsletters or even
to the
internet help under tools when in Outlook Express 6. I have to
highlight, copy and paste to go to the selected pages. Any ideas?
Thanks.

"Jimmy Buffer" wrote in message
...

Bruce Hagen wrote:
Are you refering to clicking on a link in an e-mail?

From:
http://www.fjsmjs.com/OE/nolinks.htm

If nothing happens when you click a link:
Open Windows Explorer.
Go to Tools | Folder Options | File Types.
Scroll down to URL:HyperText Transfer Protocol and select it.
Click Edit or Advanced, depending on your Windows version.
Select 'open'.
Click Edit.

"Application used to perform this action" should read:

"C:\PROGRAM FILES\INTERNET EXPLORER\iexplore.exe" -nohome
(Check the path to iexplore.exe to make sure that is correct and use
the double quotes.)

DDE should be checked and in the boxes below it you should have:

#1:
"%1",,-1,0,,,,
#2
IExplore
#3 (blank)

#4
WWW_OpenURL

URL:HyperText Transfer Protocol with Privacy should be the same.

Sometimes it is necessary to uncheck Use DDE.



If you get a blank page:


1. Click Start, and then click Run.

2. In the Open box, type:

regsvr32 urlmon.dll

3. Click OK, and then click OK again when you receive the following
message:
DllRegisterServer in urlmon.dll succeeded.


4. If that doesn't fix it, see this article:

http://www.mvps.org/inetexplorer/answers.htm#new_window

5. If you are using WinXP try this:
http://www.mvps.org/sramesh2k/reg/IE...lt_Browser.reg


You can also try this:

Go to Start/run, and type SFC (msconfig for WinXP).
Choose 'Extract One File From Installation Disk' ("Expand File" for
WinXP). Type oleaut32.dll, not worrying about its location. Then,
click Start.
Next to 'Restore From', type in or browse for the file's location,
which is probably in the Win98 (i386 for WinXP) folder of your
installation CD-ROM (typically D:\Win98), or in your
Windows\Options\Cabs (Windows\i386 for WinXP) folder, as the case may
be.
Then, next to 'Save File In', enter C:\Windows\System
(C:\Windows\System32 for WinXP), and click OK. System File Checker
(or msconfig) looks for the file, saves it as you requested, and then
tells you that 'the file has been successfully extracted'.

You may need to reboot.

Bruce, I have been here before and find you very helpful and for that I am
grateful. However I am asking for help again in this matter. I need to
know what might be the cause of this returning problem and if you can help
me here I promise to make a donation.

Malware Removal:
http://www.elephantboycomputers.com/...moving_Malware

--
Frank Saunders, MS-MVP OE
Please respond in Newsgroup only. Do not send email
http://www.fjsmjs.com
Protect your PC
http://www.microsoft.com/security/protect/

Let 'em make a donation. eg

Bruce

"Frank Saunders, MS-MVP OE" wrote in message
...
"Jimmy Buffer" wrote in message
...

Bruce Hagen wrote:
Are you refering to clicking on a link in an e-mail?

From:
http://www.fjsmjs.com/OE/nolinks.htm

If nothing happens when you click a link:
Open Windows Explorer.
Go to Tools | Folder Options | File Types.
Scroll down to URL:HyperText Transfer Protocol and select it.
Click Edit or Advanced, depending on your Windows version.
Select 'open'.
Click Edit.

"Application used to perform this action" should read:

"C:\PROGRAM FILES\INTERNET EXPLORER\iexplore.exe" -nohome
(Check the path to iexplore.exe to make sure that is correct and use
the double quotes.)

DDE should be checked and in the boxes below it you should have:

#1:
"%1",,-1,0,,,,
#2
IExplore
#3 (blank)

#4
WWW_OpenURL

URL:HyperText Transfer Protocol with Privacy should be the same.

Sometimes it is necessary to uncheck Use DDE.



If you get a blank page:


1. Click Start, and then click Run.

2. In the Open box, type:

regsvr32 urlmon.dll

3. Click OK, and then click OK again when you receive the following
message:
DllRegisterServer in urlmon.dll succeeded.


4. If that doesn't fix it, see this article:

http://www.mvps.org/inetexplorer/answers.htm#new_window

5. If you are using WinXP try this:
http://www.mvps.org/sramesh2k/reg/IE...lt_Browser.reg


You can also try this:

Go to Start/run, and type SFC (msconfig for WinXP).
Choose 'Extract One File From Installation Disk' ("Expand File" for
WinXP). Type oleaut32.dll, not worrying about its location. Then,
click Start.
Next to 'Restore From', type in or browse for the file's location,
which is probably in the Win98 (i386 for WinXP) folder of your
installation CD-ROM (typically D:\Win98), or in your
Windows\Options\Cabs (Windows\i386 for WinXP) folder, as the case may
be.
Then, next to 'Save File In', enter C:\Windows\System
(C:\Windows\System32 for WinXP), and click OK. System File Checker
(or msconfig) looks for the file, saves it as you requested, and then
tells you that 'the file has been successfully extracted'.

You may need to reboot.

Bruce, I have been here before and find you very helpful and for that I
am grateful. However I am asking for help again in this matter. I need to
know what might be the cause of this returning problem and if you can
help me here I promise to make a donation.

Malware Removal:
http://www.elephantboycomputers.com/...moving_Malware

--
Frank Saunders, MS-MVP OE
Please respond in Newsgroup only. Do not send email
http://www.fjsmjs.com
Protect your PC
http://www.microsoft.com/security/protect/

Bruce Hagen wrote:
Let 'em make a donation. eg

Bruce

This is if you can ID my problem without having to go over stuff that has
been around for years. I have read and read and tried fixes that worked and
can try them again but I need to know from someone that has had this happen
what to do. It is easy to post a generic answer in the form of a link that
leads to 50 more links. If someone knows what the problem is then that is
the one that can explain exactly what to do.

Thanks.

DUB



"Frank Saunders, MS-MVP OE" wrote in message
...
"Jimmy Buffer" wrote in message
...

Bruce Hagen wrote:
Are you refering to clicking on a link in an e-mail?

From:
http://www.fjsmjs.com/OE/nolinks.htm

If nothing happens when you click a link:
Open Windows Explorer.
Go to Tools | Folder Options | File Types.
Scroll down to URL:HyperText Transfer Protocol and select it.
Click Edit or Advanced, depending on your Windows version.
Select 'open'.
Click Edit.

"Application used to perform this action" should read:

"C:\PROGRAM FILES\INTERNET EXPLORER\iexplore.exe" -nohome
(Check the path to iexplore.exe to make sure that is correct and
use the double quotes.)

DDE should be checked and in the boxes below it you should have:

#1:
"%1",,-1,0,,,,
#2
IExplore
#3 (blank)

#4
WWW_OpenURL

URL:HyperText Transfer Protocol with Privacy should be the same.

Sometimes it is necessary to uncheck Use DDE.



If you get a blank page:


1. Click Start, and then click Run.

2. In the Open box, type:

regsvr32 urlmon.dll

3. Click OK, and then click OK again when you receive the following
message:
DllRegisterServer in urlmon.dll succeeded.


4. If that doesn't fix it, see this article:

http://www.mvps.org/inetexplorer/answers.htm#new_window

5. If you are using WinXP try this:
http://www.mvps.org/sramesh2k/reg/IE...lt_Browser.reg


You can also try this:

Go to Start/run, and type SFC (msconfig for WinXP).
Choose 'Extract One File From Installation Disk' ("Expand File" for
WinXP). Type oleaut32.dll, not worrying about its location. Then,
click Start.
Next to 'Restore From', type in or browse for the file's location,
which is probably in the Win98 (i386 for WinXP) folder of your
installation CD-ROM (typically D:\Win98), or in your
Windows\Options\Cabs (Windows\i386 for WinXP) folder, as the case
may be.
Then, next to 'Save File In', enter C:\Windows\System
(C:\Windows\System32 for WinXP), and click OK. System File Checker
(or msconfig) looks for the file, saves it as you requested, and
then tells you that 'the file has been successfully extracted'.

You may need to reboot.

Bruce, I have been here before and find you very helpful and for
that I am grateful. However I am asking for help again in this
matter. I need to know what might be the cause of this returning
problem and if you can help me here I promise to make a donation.

Malware Removal:
http://www.elephantboycomputers.com/...moving_Malware

--
Frank Saunders, MS-MVP OE
Please respond in Newsgroup only. Do not send email
http://www.fjsmjs.com
Protect your PC
http://www.microsoft.com/security/protect/