Greetings... I'm looking for help from TK of

http://www.insideoe.com

and of course, I'll accept help from anybody
else here who knows the answer.

And I hope I haven't missed a FAQ somewhere
that answers my questions.

My problem is that sometimes OE v.6 does not
include my programmed reply characters when
I respond to a post on UseNet. If I understood
the FAQ at the above website, this is called the
"MIME/Quoted Printable design issue".

In the TOOLS section of the above website, I
found "OE-QuoteFix", and TK described this as...

"It also corrects the "design decision" that
prevents OE from properly formatting quoted
text that was sent as MIME/Quoted Printable."

Well, I installed OE-QuoteFix, and I configured
it many, many different ways, but nothing I do
has been able to add the missing "" reply
characters when I hit "Reply Group".

I am so tired of adding these characters to my
replies manually. Can anybody help? TK?
Anybody?

happy days and...
starry starry nights!

--
Indelibly yours,
Paine

P.S. Thank YOU for reading!

P.P.S. (shh) Some secret sites...
http://painellsworth.net
http://savethechildren.org
http://eBook-eDen.secretsgolden.com

For Plain Text News, use MIME / None.
--
Bruce Hagen
MS-MVP Outlook Express
Imperial Beach, CA


"Painius" wrote in message
...
Greetings... I'm looking for help from TK of

http://www.insideoe.com

and of course, I'll accept help from anybody
else here who knows the answer.

And I hope I haven't missed a FAQ somewhere
that answers my questions.

My problem is that sometimes OE v.6 does not
include my programmed reply characters when
I respond to a post on UseNet. If I understood
the FAQ at the above website, this is called the
"MIME/Quoted Printable design issue".

In the TOOLS section of the above website, I
found "OE-QuoteFix", and TK described this as...

"It also corrects the "design decision" that
prevents OE from properly formatting quoted
text that was sent as MIME/Quoted Printable."

Well, I installed OE-QuoteFix, and I configured
it many, many different ways, but nothing I do
has been able to add the missing "" reply
characters when I hit "Reply Group".

I am so tired of adding these characters to my
replies manually. Can anybody help? TK?
Anybody?

happy days and...
starry starry nights!

--
Indelibly yours,
Paine

P.S. Thank YOU for reading!

P.P.S. (shh) Some secret sites...
http://painellsworth.net
http://savethechildren.org
http://eBook-eDen.secretsgolden.com

"Bruce Hagen" wrote in message
...
"Painius" wrote in message
...

Greetings... I'm looking for help from TK of

http://www.insideoe.com

and of course, I'll accept help from anybody
else here who knows the answer.

And I hope I haven't missed a FAQ somewhere
that answers my questions.

My problem is that sometimes OE v.6 does not
include my programmed reply characters when
I respond to a post on UseNet. If I understood
the FAQ at the above website, this is called the
"MIME/Quoted Printable design issue".

In the TOOLS section of the above website, I
found "OE-QuoteFix", and TK described this as...

"It also corrects the "design decision" that
prevents OE from properly formatting quoted
text that was sent as MIME/Quoted Printable."

Well, I installed OE-QuoteFix, and I configured
it many, many different ways, but nothing I do
has been able to add the missing "" reply
characters when I hit "Reply Group".

I am so tired of adding these characters to my
replies manually. Can anybody help? TK?
Anybody?

For Plain Text News, use MIME / None.
--
Bruce Hagen
MS-MVP Outlook Express
Imperial Beach, CA

Thank you, Bruce, and yet I've already tried that.
I reasoned that it didn't work because it is a SEND
option and only means that my response will be
sent out in MIME with no encoding.

Besides spank me and call me Streisand, but I do
really prefer uuencode.

Any ideas as to what I can do to get OE to include
the reply characters? the 's? for all replies and
not just some of them?

happy days and...
starry starry nights!

--
Indelibly yours,
Paine

P.S. Thank YOU for reading!

P.P.S. (shh) Some secret sites...
http://painellsworth.net
http://savethechildren.org
http://eBook-eDen.secretsgolden.com

"Painius" wrote in message
...
"Bruce Hagen" wrote in message
...
"Painius" wrote in message
...

Greetings... I'm looking for help from TK of

http://www.insideoe.com

and of course, I'll accept help from anybody
else here who knows the answer.

And I hope I haven't missed a FAQ somewhere
that answers my questions.

My problem is that sometimes OE v.6 does not
include my programmed reply characters when
I respond to a post on UseNet. If I understood
the FAQ at the above website, this is called the
"MIME/Quoted Printable design issue".

In the TOOLS section of the above website, I
found "OE-QuoteFix", and TK described this as...

"It also corrects the "design decision" that
prevents OE from properly formatting quoted
text that was sent as MIME/Quoted Printable."

Well, I installed OE-QuoteFix, and I configured
it many, many different ways, but nothing I do
has been able to add the missing "" reply
characters when I hit "Reply Group".

I am so tired of adding these characters to my
replies manually. Can anybody help? TK?
Anybody?

For Plain Text News, use MIME / None.
--
Bruce Hagen
MS-MVP Outlook Express
Imperial Beach, CA

Thank you, Bruce, and yet I've already tried that.
I reasoned that it didn't work because it is a SEND
option and only means that my response will be
sent out in MIME with no encoding.

Besides spank me and call me Streisand, but I do
really prefer uuencode.

Any ideas as to what I can do to get OE to include
the reply characters? the 's? for all replies and
not just some of them?

happy days and...
starry starry nights!

--
Indelibly yours,
Paine

P.S. Thank YOU for reading!

P.P.S. (shh) Some secret sites...
http://painellsworth.net
http://savethechildren.org
http://eBook-eDen.secretsgolden.com





If you reply to a post that used Quoted Printable, OE will not add the
carats. It was just designed that way. I don't know for sure, but I have
heard that a reply to someone using Google Groups will sometimes not insert
the carats even if the OP used MIME / None.

I have not used OE-QuoteFix, so I can't speak on that.
--
Bruce Hagen
MS-MVP Outlook Express
Imperial Beach, CA

"Bruce Hagen" wrote in message
...
"Painius" wrote in message
...
"Bruce Hagen" wrote in message
...
"Painius" wrote in message
...

Greetings... I'm looking for help from TK of

http://www.insideoe.com

and of course, I'll accept help from anybody
else here who knows the answer.

And I hope I haven't missed a FAQ somewhere
that answers my questions.

My problem is that sometimes OE v.6 does not
include my programmed reply characters when
I respond to a post on UseNet. If I understood
the FAQ at the above website, this is called the
"MIME/Quoted Printable design issue".

In the TOOLS section of the above website, I
found "OE-QuoteFix", and TK described this as...

"It also corrects the "design decision" that
prevents OE from properly formatting quoted
text that was sent as MIME/Quoted Printable."

Well, I installed OE-QuoteFix, and I configured
it many, many different ways, but nothing I do
has been able to add the missing "" reply
characters when I hit "Reply Group".

I am so tired of adding these characters to my
replies manually. Can anybody help? TK?
Anybody?

For Plain Text News, use MIME / None.
--
Bruce Hagen
MS-MVP Outlook Express
Imperial Beach, CA

Thank you, Bruce, and yet I've already tried that.
I reasoned that it didn't work because it is a SEND
option and only means that my response will be
sent out in MIME with no encoding.

Besides spank me and call me Streisand, but I do
really prefer uuencode.

Any ideas as to what I can do to get OE to include
the reply characters? the 's? for all replies and
not just some of them?

If you reply to a post that used Quoted Printable, OE will not add the
carats. It was just designed that way. I don't know for sure, but I have
heard that a reply to someone using Google Groups will sometimes not
insert the carats even if the OP used MIME / None.

I have not used OE-QuoteFix, so I can't speak on that.
--
Bruce Hagen
MS-MVP Outlook Express
Imperial Beach, CA

Thank you again, Bruce. That's just a little
confusing but I get your drift. We are, of
course, speaking of the "greater than sign"
or "", and not a "carat" or "^".

TK of the website i linked to above has said
that OE-QF would solve the problem and add
the 's back in when you hit "Reply Group".

The C++ author of OE-QF also says that the
design issue is solved by the software. But
I haven't been able to get it to work, yet.

Thank you for responding, though. I do very
much appreciate it!

Just out of curiosity, Bruce, when you hit
"Reply Group" to respond to my posts, does
your reader's font change in any way? I have
my OE news font set to 14 pt. Verdana, and
when I respond to someone who sends using
uuencode, the font is changed in my reply
window. (This doesn't usually happen, even
when I'm replying to MIME/Quoted Printable.)

happy days and...
starry starry nights!

--
Indelibly yours,
Paine

P.S. Thank YOU for reading!

P.P.S. (shh) Some secret sites...
http://painellsworth.net
http://savethechildren.org
http://eBook-eDen.secretsgolden.com

"Painius" wrote in message
...
"Bruce Hagen" wrote in message
...
"Painius" wrote in message
...
"Bruce Hagen" wrote in message
...
"Painius" wrote in message
...

Greetings... I'm looking for help from TK of

http://www.insideoe.com

and of course, I'll accept help from anybody
else here who knows the answer.

And I hope I haven't missed a FAQ somewhere
that answers my questions.

My problem is that sometimes OE v.6 does not
include my programmed reply characters when
I respond to a post on UseNet. If I understood
the FAQ at the above website, this is called the
"MIME/Quoted Printable design issue".

In the TOOLS section of the above website, I
found "OE-QuoteFix", and TK described this as...

"It also corrects the "design decision" that
prevents OE from properly formatting quoted
text that was sent as MIME/Quoted Printable."

Well, I installed OE-QuoteFix, and I configured
it many, many different ways, but nothing I do
has been able to add the missing "" reply
characters when I hit "Reply Group".

I am so tired of adding these characters to my
replies manually. Can anybody help? TK?
Anybody?

For Plain Text News, use MIME / None.
--
Bruce Hagen
MS-MVP Outlook Express
Imperial Beach, CA

Thank you, Bruce, and yet I've already tried that.
I reasoned that it didn't work because it is a SEND
option and only means that my response will be
sent out in MIME with no encoding.

Besides spank me and call me Streisand, but I do
really prefer uuencode.

Any ideas as to what I can do to get OE to include
the reply characters? the 's? for all replies and
not just some of them?

If you reply to a post that used Quoted Printable, OE will not add the
carats. It was just designed that way. I don't know for sure, but I have
heard that a reply to someone using Google Groups will sometimes not
insert the carats even if the OP used MIME / None.

I have not used OE-QuoteFix, so I can't speak on that.
--
Bruce Hagen
MS-MVP Outlook Express
Imperial Beach, CA

Thank you again, Bruce. That's just a little
confusing but I get your drift. We are, of
course, speaking of the "greater than sign"
or "", and not a "carat" or "^".

TK of the website i linked to above has said
that OE-QF would solve the problem and add
the 's back in when you hit "Reply Group".

The C++ author of OE-QF also says that the
design issue is solved by the software. But
I haven't been able to get it to work, yet.

Thank you for responding, though. I do very
much appreciate it!

Just out of curiosity, Bruce, when you hit
"Reply Group" to respond to my posts, does
your reader's font change in any way? I have
my OE news font set to 14 pt. Verdana, and
when I respond to someone who sends using
uuencode, the font is changed in my reply
window. (This doesn't usually happen, even
when I'm replying to MIME/Quoted Printable.)

happy days and...
starry starry nights!

--
Indelibly yours,
Paine

P.S. Thank YOU for reading!

P.P.S. (shh) Some secret sites...
http://painellsworth.net
http://savethechildren.org
http://eBook-eDen.secretsgolden.com



I thought was a carat. Oh, well. I'm just a retired truck driver. g

My font never changes. It is set to 12pt. Ariel and that is what I see for
all posts, reading or replying. That is Plain Text posts. HTML will change
it.

I note that you reduced the word wrap for this post. Default is 76.

I think you know, but just to be sure, Tom Koch is the author of Inside OE.
Dominik Jain is the author of OE-QuoteFix.

There is a Help and FAQ area at the OE-QuoteFix site that /may/ help you.
Like I said, I have never used it, but I think you should be able to indent
a reply with just about any character you want with that program.
--
Bruce Hagen
MS-MVP Outlook Express
Imperial Beach, CA

"Bruce Hagen" wrote in message
...
"Painius" wrote in message
...
"Bruce Hagen" wrote in message
...
"Painius" wrote in message
...
"Bruce Hagen" wrote in message
...
"Painius" wrote in message
...

Greetings... I'm looking for help from TK of

http://www.insideoe.com

and of course, I'll accept help from anybody
else here who knows the answer.

And I hope I haven't missed a FAQ somewhere
that answers my questions.

My problem is that sometimes OE v.6 does not
include my programmed reply characters when
I respond to a post on UseNet. If I understood
the FAQ at the above website, this is called the
"MIME/Quoted Printable design issue".

In the TOOLS section of the above website, I
found "OE-QuoteFix", and TK described this as...

"It also corrects the "design decision" that
prevents OE from properly formatting quoted
text that was sent as MIME/Quoted Printable."

Well, I installed OE-QuoteFix, and I configured
it many, many different ways, but nothing I do
has been able to add the missing "" reply
characters when I hit "Reply Group".

I am so tired of adding these characters to my
replies manually. Can anybody help? TK?
Anybody?

For Plain Text News, use MIME / None.
--
Bruce Hagen
MS-MVP Outlook Express
Imperial Beach, CA

Thank you, Bruce, and yet I've already tried that.
I reasoned that it didn't work because it is a SEND
option and only means that my response will be
sent out in MIME with no encoding.

Besides spank me and call me Streisand, but I do
really prefer uuencode.

Any ideas as to what I can do to get OE to include
the reply characters? the 's? for all replies and
not just some of them?

If you reply to a post that used Quoted Printable, OE will not add the
carats. It was just designed that way. I don't know for sure, but I have
heard that a reply to someone using Google Groups will sometimes not
insert the carats even if the OP used MIME / None.

I have not used OE-QuoteFix, so I can't speak on that.
--
Bruce Hagen
MS-MVP Outlook Express
Imperial Beach, CA

Thank you again, Bruce. That's just a little
confusing but I get your drift. We are, of
course, speaking of the "greater than sign"
or "", and not a "carat" or "^".

TK of the website i linked to above has said
that OE-QF would solve the problem and add
the 's back in when you hit "Reply Group".

The C++ author of OE-QF also says that the
design issue is solved by the software. But
I haven't been able to get it to work, yet.

Thank you for responding, though. I do very
much appreciate it!

Just out of curiosity, Bruce, when you hit
"Reply Group" to respond to my posts, does
your reader's font change in any way? I have
my OE news font set to 14 pt. Verdana, and
when I respond to someone who sends using
uuencode, the font is changed in my reply
window. (This doesn't usually happen, even
when I'm replying to MIME/Quoted Printable.)

I thought was a carat. Oh, well. I'm just a retired truck driver. g

No problemo, Bruce. I've driven some truck
myself. Small world?

My font never changes. It is set to 12pt. Ariel and that is what I see for
all posts, reading or replying. That is Plain Text posts. HTML will change
it.

I note that you reduced the word wrap for this post. Default is 76.

That's the OE-QF doing it. My OE is always set to
76, and I reset OE-QF to 76 for this post. (It was
defaulted to 70, and I upped that to 72 when I
first installed it.)

I think you know, but just to be sure, Tom Koch is the author of Inside
OE. Dominik Jain is the author of OE-QuoteFix. There is a Help and FAQ
area at the OE-QuoteFix site that /may/ help you.

Yes, and I've been thru 'n thru Dominik's material.
The only thing I found was a vague...

"Quoting of Quoted-Printable, Base64 and even
HTML messages is finally possible."

....on his "Features" page. Tom says he uses OE-QF,
and he was specific...

"It also corrects the "design decision" that
prevents OE from properly formatting quoted
text that was sent as MIME/Quoted Printable."

....and yet I haven't been able to figure out how the
software should be configured to do it.

Like I said, I have never used it, but I think you should be able to
indent a reply with just about any character you want with that program.
--
Bruce Hagen
MS-MVP Outlook Express
Imperial Beach, CA

Thank you again, Bruce. Keep the greasy side
down, and best of everything to you and yours!

happy days and...
starry starry nights!

--
Indelibly yours,
Paine

P.S. Thank YOU for reading!

P.P.S. (shh) Some secret sites...
http://painellsworth.net
http://savethechildren.org
http://eBook-eDen.secretsgolden.com

"Bruce Hagen" wrote in message
...

I thought was a carat. Oh, well. I'm just a retired truck driver. g

Actually a "carat" is something different from a "caret"... ; )

http://ca.encarta.msn.com/dictionary...970/caret.html

(Live Search for
define:caret
)


Ironically this "definition" makes it look as if it is the Less than symbol ()
which would also be unconventional.

Heh. CharMap calls ^ "Circumflex Accent" (U+005E) even when
it is showing as a separate character. ; }


---