Hello,

I have a form that a user sent me that contains a stationary I deleted it
and populate the form with text, combo boxes. It also has To, From,
Subject. This form enables a user to populate information and send it to a
database administrator. I saved the form as an oft extention and publish
it. It looks great when I go Form - Run this form it looks fine to me. My
problem is when I test ths form I run into a problem. I go into Outlook
2003 I go to New Mail Message Choose form and select the form I enhanced - I
get the form it looks great I populate the form and send it via e-mail to my
address and when I open it up I don't get the text boxes, combo boxes, etc.
All I get is the original oft that contains the stationary that was sent to
me. What gives all I did was use a co-worker oft and enhanced it. I would
sure appreciate anybodys help. Thank you in advance

In article , Alex Martinez wrote:
What gives all I did was use a co-worker oft and enhanced it. I would
sure appreciate anybodys help. Thank you in advance

First, did the co-worker get more than just stationary when they used the
unenhanced form?

There could be a couple of problems with what you did:

1) The form was split, with a compose and a read form. You changed the
compose form, but didn't add anything to the read form. Usually, you do
not want to use split forms; but, if you do, then you want to create all
the common elements, and then split the form.

2) You did not send the form using the TNEF wrapper. This is forced by
choosing to always use rtf format when sending the form. This is done on
the Contact data item for the recipient. You open the Contact data item,
right-click the email address, and choose properties. Depending on the
version of Outlook you are using, there will be a check box, or a
drop-down list box, and you check the box or select the rtf option.

Hollis D. Paul [MVP - Outlook]
Mukilteo, WA USA

Did you click the Edit Read Page button and create a read layout with the same controls as you added for the compose layout?

--
Sue Mosher, Outlook MVP
Author of Configuring Microsoft Outlook 2003
http://www.turtleflock.com/olconfig/index.htm
and Microsoft Outlook Programming - Jumpstart for
Administrators, Power Users, and Developers
http://www.outlookcode.com/jumpstart.aspx


"Alex Martinez" wrote in message ...
Hello,

I have a form that a user sent me that contains a stationary I deleted it
and populate the form with text, combo boxes. It also has To, From,
Subject. This form enables a user to populate information and send it to a
database administrator. I saved the form as an oft extention and publish
it. It looks great when I go Form - Run this form it looks fine to me. My
problem is when I test ths form I run into a problem. I go into Outlook
2003 I go to New Mail Message Choose form and select the form I enhanced - I
get the form it looks great I populate the form and send it via e-mail to my
address and when I open it up I don't get the text boxes, combo boxes, etc.
All I get is the original oft that contains the stationary that was sent to
me. What gives all I did was use a co-worker oft and enhanced it. I would
sure appreciate anybodys help. Thank you in advance

Sue,

Thanks, I copied the oft file into my work network and it seem to work. I
was able to populate the form, but when I send it out the receiver does not
get the populated form just the form I have to firgure this out. I recently
purchased your book and it was helpful. Thanks again.

"Sue Mosher [MVP-Outlook]" wrote in message
...
Did you click the Edit Read Page button and create a read layout with the
same controls as you added for the compose layout?

--
Sue Mosher, Outlook MVP
Author of Configuring Microsoft Outlook 2003
http://www.turtleflock.com/olconfig/index.htm
and Microsoft Outlook Programming - Jumpstart for
Administrators, Power Users, and Developers
http://www.outlookcode.com/jumpstart.aspx


"Alex Martinez" wrote in message
...
Hello,

I have a form that a user sent me that contains a stationary I deleted it
and populate the form with text, combo boxes. It also has To, From,
Subject. This form enables a user to populate information and send it to
a
database administrator. I saved the form as an oft extention and publish
it. It looks great when I go Form - Run this form it looks fine to me.
My
problem is when I test ths form I run into a problem. I go into Outlook
2003 I go to New Mail Message Choose form and select the form I enhanced -
I
get the form it looks great I populate the form and send it via e-mail to
my
address and when I open it up I don't get the text boxes, combo boxes,
etc.
All I get is the original oft that contains the stationary that was sent
to
me. What gives all I did was use a co-worker oft and enhanced it. I
would
sure appreciate anybodys help. Thank you in advance

Thanks for the tip Paul

"Hollis D. Paul" wrote in message
...
In article , Alex Martinez wrote:
What gives all I did was use a co-worker oft and enhanced it. I would
sure appreciate anybodys help. Thank you in advance

First, did the co-worker get more than just stationary when they used the
unenhanced form?

There could be a couple of problems with what you did:

1) The form was split, with a compose and a read form. You changed the
compose form, but didn't add anything to the read form. Usually, you do
not want to use split forms; but, if you do, then you want to create all
the common elements, and then split the form.

2) You did not send the form using the TNEF wrapper. This is forced by
choosing to always use rtf format when sending the form. This is done on
the Contact data item for the recipient. You open the Contact data item,
right-click the email address, and choose properties. Depending on the
version of Outlook you are using, there will be a check box, or a
drop-down list box, and you check the box or select the rtf option.

Hollis D. Paul [MVP - Outlook]
Mukilteo, WA USA

Did you check the box for "send form definition with item" on the (Properties) page in design mode?

Does the form include custom fields?

What Outlook version and build number?

--
Sue Mosher, Outlook MVP
Author of Configuring Microsoft Outlook 2003
http://www.turtleflock.com/olconfig/index.htm
and Microsoft Outlook Programming - Jumpstart for
Administrators, Power Users, and Developers
http://www.outlookcode.com/jumpstart.aspx


"Alex Martinez" wrote in message ...
Sue,

Thanks, I copied the oft file into my work network and it seem to work. I
was able to populate the form, but when I send it out the receiver does not
get the populated form just the form I have to firgure this out. I recently
purchased your book and it was helpful. Thanks again.

"Sue Mosher [MVP-Outlook]" wrote in message
...
Did you click the Edit Read Page button and create a read layout with the
same controls as you added for the compose layout?

--
Sue Mosher, Outlook MVP
Author of Configuring Microsoft Outlook 2003
http://www.turtleflock.com/olconfig/index.htm
and Microsoft Outlook Programming - Jumpstart for
Administrators, Power Users, and Developers
http://www.outlookcode.com/jumpstart.aspx


"Alex Martinez" wrote in message
...
Hello,

I have a form that a user sent me that contains a stationary I deleted it
and populate the form with text, combo boxes. It also has To, From,
Subject. This form enables a user to populate information and send it to
a
database administrator. I saved the form as an oft extention and publish
it. It looks great when I go Form - Run this form it looks fine to me.
My
problem is when I test ths form I run into a problem. I go into Outlook
2003 I go to New Mail Message Choose form and select the form I enhanced -
I
get the form it looks great I populate the form and send it via e-mail to
my
address and when I open it up I don't get the text boxes, combo boxes,
etc.
All I get is the original oft that contains the stationary that was sent
to
me. What gives all I did was use a co-worker oft and enhanced it. I
would
sure appreciate anybodys help. Thank you in advance

Hi Sue,

Yes, I did check the box for 'send form definition with item" on the
Properties page in design mode. I am not sure what you mean about custom
fields. I did created "custom" text boxes using Field Chooser. I created
the form using Outlook 2003 (Sp2) and using it in my work place, which we
use Outlook 2002. I am not sure what build number means. Thanks again Sue.


"Sue Mosher [MVP-Outlook]" wrote in message
...
Did you check the box for "send form definition with item" on the
(Properties) page in design mode?

Does the form include custom fields?

What Outlook version and build number?

--
Sue Mosher, Outlook MVP
Author of Configuring Microsoft Outlook 2003
http://www.turtleflock.com/olconfig/index.htm
and Microsoft Outlook Programming - Jumpstart for
Administrators, Power Users, and Developers
http://www.outlookcode.com/jumpstart.aspx


"Alex Martinez" wrote in message
...
Sue,

Thanks, I copied the oft file into my work network and it seem to work. I
was able to populate the form, but when I send it out the receiver does
not
get the populated form just the form I have to firgure this out. I
recently
purchased your book and it was helpful. Thanks again.

"Sue Mosher [MVP-Outlook]" wrote in message
...
Did you click the Edit Read Page button and create a read layout with the
same controls as you added for the compose layout?

--
Sue Mosher, Outlook MVP
Author of Configuring Microsoft Outlook 2003
http://www.turtleflock.com/olconfig/index.htm
and Microsoft Outlook Programming - Jumpstart for
Administrators, Power Users, and Developers
http://www.outlookcode.com/jumpstart.aspx


"Alex Martinez" wrote in message
...
Hello,

I have a form that a user sent me that contains a stationary I deleted it
and populate the form with text, combo boxes. It also has To, From,
Subject. This form enables a user to populate information and send it
to
a
database administrator. I saved the form as an oft extention and publish
it. It looks great when I go Form - Run this form it looks fine to me.
My
problem is when I test ths form I run into a problem. I go into Outlook
2003 I go to New Mail Message Choose form and select the form I
enhanced -
I
get the form it looks great I populate the form and send it via e-mail to
my
address and when I open it up I don't get the text boxes, combo boxes,
etc.
All I get is the original oft that contains the stationary that was sent
to
me. What gives all I did was use a co-worker oft and enhanced it. I
would
sure appreciate anybodys help. Thank you in advance

Your custom text boxes are display controls that show the data that Outlook actually stores in custom properties, which you created with the Field Chooser.

Build number is the number that begins with 11. on the Help | About Microsoft Outlook dialog.

Repeating my earlier question: Did you click the Edit Read Page button in design mode to make a read layout that includes your text boxes, bound to the same fields as on the compose layout?

--
Sue Mosher, Outlook MVP
Author of Configuring Microsoft Outlook 2003
http://www.turtleflock.com/olconfig/index.htm
and Microsoft Outlook Programming - Jumpstart for
Administrators, Power Users, and Developers
http://www.outlookcode.com/jumpstart.aspx


"Alex Martinez" wrote in message ...
Hi Sue,

Yes, I did check the box for 'send form definition with item" on the
Properties page in design mode. I am not sure what you mean about custom
fields. I did created "custom" text boxes using Field Chooser. I created
the form using Outlook 2003 (Sp2) and using it in my work place, which we
use Outlook 2002. I am not sure what build number means. Thanks again Sue.


"Sue Mosher [MVP-Outlook]" wrote in message
...
Did you check the box for "send form definition with item" on the
(Properties) page in design mode?

Does the form include custom fields?

What Outlook version and build number?


"Alex Martinez" wrote in message
...
Sue,

Thanks, I copied the oft file into my work network and it seem to work. I
was able to populate the form, but when I send it out the receiver does
not
get the populated form just the form I have to firgure this out. I
recently
purchased your book and it was helpful. Thanks again.

"Sue Mosher [MVP-Outlook]" wrote in message
...
Did you click the Edit Read Page button and create a read layout with the
same controls as you added for the compose layout?

"Alex Martinez" wrote in message
...
Hello,

I have a form that a user sent me that contains a stationary I deleted it
and populate the form with text, combo boxes. It also has To, From,
Subject. This form enables a user to populate information and send it
to
a
database administrator. I saved the form as an oft extention and publish
it. It looks great when I go Form - Run this form it looks fine to me.
My
problem is when I test ths form I run into a problem. I go into Outlook
2003 I go to New Mail Message Choose form and select the form I
enhanced -
I
get the form it looks great I populate the form and send it via e-mail to
my
address and when I open it up I don't get the text boxes, combo boxes,
etc.
All I get is the original oft that contains the stationary that was sent
to
me. What gives all I did was use a co-worker oft and enhanced it. I
would
sure appreciate anybodys help. Thank you in advance

The build number of my Outlook 2003 is (11.8002.6568) SP2. I did not click
on the Edit Read Page button. Thanks


"Sue Mosher [MVP-Outlook]" wrote in message
...
Your custom text boxes are display controls that show the data that Outlook
actually stores in custom properties, which you created with the Field
Chooser.

Build number is the number that begins with 11. on the Help | About
Microsoft Outlook dialog.

Repeating my earlier question: Did you click the Edit Read Page button in
design mode to make a read layout that includes your text boxes, bound to
the same fields as on the compose layout?

--
Sue Mosher, Outlook MVP
Author of Configuring Microsoft Outlook 2003
http://www.turtleflock.com/olconfig/index.htm
and Microsoft Outlook Programming - Jumpstart for
Administrators, Power Users, and Developers
http://www.outlookcode.com/jumpstart.aspx


"Alex Martinez" wrote in message
...
Hi Sue,

Yes, I did check the box for 'send form definition with item" on the
Properties page in design mode. I am not sure what you mean about custom
fields. I did created "custom" text boxes using Field Chooser. I created
the form using Outlook 2003 (Sp2) and using it in my work place, which we
use Outlook 2002. I am not sure what build number means. Thanks again
Sue.


"Sue Mosher [MVP-Outlook]" wrote in message
...
Did you check the box for "send form definition with item" on the
(Properties) page in design mode?

Does the form include custom fields?

What Outlook version and build number?


"Alex Martinez" wrote in message
...
Sue,

Thanks, I copied the oft file into my work network and it seem to work.
I
was able to populate the form, but when I send it out the receiver does
not
get the populated form just the form I have to firgure this out. I
recently
purchased your book and it was helpful. Thanks again.

"Sue Mosher [MVP-Outlook]" wrote in message
...
Did you click the Edit Read Page button and create a read layout with the
same controls as you added for the compose layout?

"Alex Martinez" wrote in message
...
Hello,

I have a form that a user sent me that contains a stationary I deleted
it
and populate the form with text, combo boxes. It also has To, From,
Subject. This form enables a user to populate information and send it
to
a
database administrator. I saved the form as an oft extention and
publish
it. It looks great when I go Form - Run this form it looks fine to me.
My
problem is when I test ths form I run into a problem. I go into Outlook
2003 I go to New Mail Message Choose form and select the form I
enhanced -
I
get the form it looks great I populate the form and send it via e-mail
to
my
address and when I open it up I don't get the text boxes, combo boxes,
etc.
All I get is the original oft that contains the stationary that was sent
to
me. What gives all I did was use a co-worker oft and enhanced it. I
would
sure appreciate anybodys help. Thank you in advance

That explains the problem then. You need to customize the read layout to present the data you want the recipients to see.

--
¼á
"Alex Martinez" wrote in message ...
The build number of my Outlook 2003 is (11.8002.6568) SP2. I did not click
on the Edit Read Page button. Thanks


"Sue Mosher [MVP-Outlook]" wrote in message
...
Your custom text boxes are display controls that show the data that Outlook
actually stores in custom properties, which you created with the Field
Chooser.

Build number is the number that begins with 11. on the Help | About
Microsoft Outlook dialog.

Repeating my earlier question: Did you click the Edit Read Page button in
design mode to make a read layout that includes your text boxes, bound to
the same fields as on the compose layout?

--
Sue Mosher, Outlook MVP
Author of Configuring Microsoft Outlook 2003
http://www.turtleflock.com/olconfig/index.htm
and Microsoft Outlook Programming - Jumpstart for
Administrators, Power Users, and Developers
http://www.outlookcode.com/jumpstart.aspx


"Alex Martinez" wrote in message
...
Hi Sue,

Yes, I did check the box for 'send form definition with item" on the
Properties page in design mode. I am not sure what you mean about custom
fields. I did created "custom" text boxes using Field Chooser. I created
the form using Outlook 2003 (Sp2) and using it in my work place, which we
use Outlook 2002. I am not sure what build number means. Thanks again
Sue.


"Sue Mosher [MVP-Outlook]" wrote in message
...
Did you check the box for "send form definition with item" on the
(Properties) page in design mode?

Does the form include custom fields?

What Outlook version and build number?


"Alex Martinez" wrote in message
...
Sue,

Thanks, I copied the oft file into my work network and it seem to work.
I
was able to populate the form, but when I send it out the receiver does
not
get the populated form just the form I have to firgure this out. I
recently
purchased your book and it was helpful. Thanks again.

"Sue Mosher [MVP-Outlook]" wrote in message
...
Did you click the Edit Read Page button and create a read layout with the
same controls as you added for the compose layout?

"Alex Martinez" wrote in message
...
Hello,

I have a form that a user sent me that contains a stationary I deleted
it
and populate the form with text, combo boxes. It also has To, From,
Subject. This form enables a user to populate information and send it
to
a
database administrator. I saved the form as an oft extention and
publish
it. It looks great when I go Form - Run this form it looks fine to me.
My
problem is when I test ths form I run into a problem. I go into Outlook
2003 I go to New Mail Message Choose form and select the form I
enhanced -
I
get the form it looks great I populate the form and send it via e-mail
to
my
address and when I open it up I don't get the text boxes, combo boxes,
etc.
All I get is the original oft that contains the stationary that was sent
to
me. What gives all I did was use a co-worker oft and enhanced it. I
would
sure appreciate anybodys help. Thank you in advance